Red Epic Red Focus Operation Manual
Also see for RED FOCUS: Operation guide
                    | |
JUNE 7, 2011 © 2011 RED.COM INC.9OPERATIONThis section describes powering up/down and basic controls of RED Focus and how to initiate a project.POWER UP / DOWNPOWER UPTo power up RED Focus, press the Power button located at the front.• The Power LED will illuminate Green indicating RED Focus is on and ready.• The image displayed by RED Focus will be visible when installed on a cameras PL mount with thecamera powered up.POWER DOWNAfter 3 minutes, RED Focus will automatically power down. RED Focus cannot be powered down bypressing or holding down the Red button.NOTE: To manually power down RED Focus off, the batteries must be removed. Refer to GETTINGSTARTED > BATTERY INSTALLATION / REPLACEMENT.CAMERA BACKFOCUS ADJUSTMENTRED ONE1. Place the camera on a level, stable surface or mount the camera on a tripod.2. Using a 5/32” Allen wrench, loosen the two (2) focus ring bolts.Loosening RED ONE Focus Ring Bolts |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine