Red Epic Red Focus Operation Manual
Also see for RED FOCUS: Operation guide
                    | |
© 2011 RED.COM INC. JUNE 7, 201166BATTERY INSTALLATION / REPLACEMENTPower is supplied to RED Focus via two (2) AA batteries.To install/replace the batteries:1. Remove the two (2) screws attaching the battery cover to RED Focus.2. Remove the battery cover.RED Focus with Battery Cover Removed3. Install or remove / replace the batteries.IMPORTANT: Ensure batteries are installed as shown on RED Focus battery holder or RED Focuswill not operate.4. Install the battery cover and screws.POWER CONSUMPTIONRED Focus draws 42ma of power when on for 2 minutes. At this power consumption, two (2) 1.5v AA bat-teries will run the RED Focus for approximately 52 hours (depending on the battery quality and chargewhen installed). |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine