Red Hat DIRECTORY SERVER 8.1 - INSTALLATION GUIDE 11-01-2010 Installation Manual

Also see for 8.1: Release note Deployment guide Using instruction Reference Using instructions

Contents

Red Hat DIRECTORY SERVER 8.1 - INSTALLATION GUIDE 11-01-2010 Installation Manual Manual pdf 29 page image

HP-UX Patches19Table 2.4, “HP-UX 11i” lists the hardware requirements. Section 2.4.1, “HP-UX Patches” lists therequired patches, and the recommended system configurations are in Section 2.4.2, “HP-UX SystemConfiguration”.Criteria RequirementsOperating System HP-UX 11i with the latest patches and upgradesCPU Type HP 9000 architecture with an Itanium CPUMemory/RAM 1 GB minimumHard Disk 4 GB minimum1Other To run the Directory Server using port numbersless than 1024, such as the default port 389,you must setup and start the Directory Server asroot, but it is not necessary to run the DirectoryServer as root.You must use the largefile command to configure database files larger than 2 GB.Table 2.4. HP-UX 11i2.4.1. HP-UX PatchesThe HP-UX 11i host must have the correct packages and dependencies installed to run DirectoryServer. The patch list changes daily, so check the HP site regularly to ensure you have the latestreleases:• http://www.software.hp.com/SUPPORT_PLUS/qpk.html• http://welcome.hp.com/country/us/eng/support.htmThe first package to install is the PHSS_30966: ld(1) and linker tools cumulative patch.The other required patches are listed in Table 2.5, “HP-UX 11i Patches”. Run the dsktune utility tosee if you need to install any other patches. dsktune helps verify whether the appropriate patchesare installed on the system and provides useful information for tuning your kernel parameters for bestperformance. For information on dsktune, see Section 2.2, “Using dsktune”.Criteria RequirementsGOLDAPPS11i B.11.11.0406.5 Gold Applications Patches forHP-UX 11i v1, June 2004GOLDBASE11i B.11.11.0406.5 Gold Base Patches for HP-UX 11iv1, June 2004GOLDQPK11i HP-UX 11i Quality Pack patch from June 2004 orlaterTable 2.5. HP-UX 11i Patches2.4.2. HP-UX System ConfigurationBefore setting up Directory Server, tune your HP-UX system so Directory Server can access therespective kernel parameters. To tune HP-UX systems, enable large file support, set the TIME_WAITvalue, and modify kernel parameters.• Section 2.4.2.1, “Perl Prerequisites”