Build 21 v21.4.1FEBRUARY 23, 2010 © 2007-2010 RED.COM INC.105SD MEMORY CARD / USB MEMORY DEVICESSD MEMORY CARDThe left front of the camera has a receptacle for an SD memory card (refer to CAMERA CONTROLS underCAMERA CONTROLS AND CONNECTORS). The SD memory card allows you to upload camera firmwareupdates (refer to APPENDIX A: UPGRADING CAMERA FIRMWARE) as well as save LOOK/USER settings(refer to APPENDIX C: SAVING LOOK/USER PROFILE). When an SD memory card is installed in the cam-era, the camera displays the SD CARD icon at the top of the EVF, LCD and all external monitors.USB MEMORY DEVICEA USB memory device may be plugged into the USB connector located on the right side of the camera(refer to CAMERA CONNECTORS under CAMERA CONTROLS AND CONNECTORS). You can use a USBmemory device to upload camera firmware (refer to APPENDIX A: UPGRADING CAMERA FIRMWARE),however the camera CANNOT write to the USB memory device. When a USB memory device is pluggedinto the camera, the camera displays the USB icon at the top of the EVF, LCD and all external monitors.MEDIA ERRORSINCOMPATIBLE PROJECT/DIGIMAGThe following error may be displayed inserting a CF card or connecting a RED-DRIVE or RED-RAM (thecamera LCD will display DISK INCOMPATIBLE):When this error is present, the camera will not record and will display the following message at the top ofthe screen (the camera LCD will display INCOMPATIBLE_DIGMAG):This may be caused by one of the following:• The camera settings were changed while the media was removed and/or disconnected.• The media was formatted on a different camera with different settings.To resolve this error, connect the CF card or RED-DRIVE /RED-RAM to a computer and save the filesfrom the media to the computer. Then you can either erase the CF card or RED-DRIVE /RED-RAM usingthe computer or format the CF card or RED-DRIVE /RED-RAM using the camera for which you want touse the media.