Redback A 4585 Operating Manual
Also see for A 4585: Operating manual
                    | |
Contents
| 
Redback® A 4585 Zone Paging Systemwww.altronics.com.au Redback® Proudly Made In Australia15Paging Console3.1.1 Features• Multi zone paging.• Recall multiple zones with a single button press.• Keyboard entry labelling of recall zones.• LCD for indicating zone selections.• Pre-announcement chime.• Emergency override paging to all zones.3.1.2 DIP Switch SettingsA series of DIP switches which are accessed on the rear of the unit providea number of options.DIP switch 1 sets the PA system chime on or off.DIP switch 2 sets the internal chime on or off.DIP switch 3 sets the emergency paging on or off. (Note: The emergencypaging is only active when the A 4585 receives external emergency tones).DIP switches 4&5 are not used.DIP switches 6-8 select the ID number for the console.Table 3.1A shows the ID settings.A maximum number of 8 consoles can be connectedto the A 4585.3.1.3 Connecting the paging consolesThe consoles are connected to the A 4585 via standard Cat5e cabling as shown in Fig 3.1b. The maximum distancebetween the A 4585 and a paging console is 300m. Note that each paging console must be assigned an ID number viathe DIP switches on the rear of the unit before operation (see 3.1.2 DIP switch settings). Eg Console 1 is set to ID1, console2 is set to ID2 etcA maximum of eight consoles can be connected at one time but only used in certain configurations. There are four RJ45ports on the back of the A 4585 which can be used to connect the A 4586 paging consoles. Each port can accomodate amaximum of 1 paging console without the aid of external power supplies.Fig 3.1B shows how to connect one paging console per RJ45 port.Fig 3.1BTable 3.1AManufactured in Australia By Altronic Distributors Pty. Ltd.FromBGMAMPLRLRBGM Out24VSwitchedOutN/ODC FUSE(1A M205)From24VBATTERY24V DCINA 4575 InputN/C FromPAAMPZones1 2 3 4 5 6 7 81Paging Stations3 41 2+ -+ -2345678910111213141516100V Switching - 1 AMP SYSTEM - Connect PA amp 100V output to “From PA AMP” Terminals2 AMP SYSTEM - Connect PA amp 100V output to “From PA AMP” terminals and BGM amp 100V ouput to “From BGM AMP terminals.Connect Zone amplifier speakers to ”+” and “-” terminals.Connect Zone amplifier line level inputs to “+” , ” - ” and “ ” terminals.Preamp Switching -DIP Switch SettingsSW123-8On OffSingle Amp ModeNot UsedDual Amp ModeLine Level Speaker Level+- +- +- +- +- +- +- +-+-+-+-+-+ - - ++- - +www.altronics.com.au+ +_ _ PA Out BGM Input Evac InputEvac VoxSensitivity+ _+ _1 2 3 4 5 6 7 8A 4586 Paging ConsoleCAT5e cable(Max 300 Metres)A 4585 COMMUNICATORA 4586 Paging ConsoleCAT5e cable(Max 300 Metres)CAT5e cable(Max 300 Metres)CAT5e cable(Max 300 Metres)A 4586 Paging Console A 4586 Paging ConsolePLEASE NOTE : A MAXIMUM OF 4 PAGING CONSOLES CAN BE CONNECTED TO THE A 4585WITHOUT THE USE OF EXTERNAL POWER SUPPLIES. (AND A MAXIMUM OF 1 PAGING CONSOLE PER PORT)StoreRecallAll CallCancelA 4586 CommunicatorSystem BusyPageLock OnREDBACK A 45868 Zone CommunicatorVersion 1.1StoreRecallAll CallCancelA 4586 CommunicatorSystem BusyPageLock OnREDBACK A 45868 Zone CommunicatorVersion 1.1StoreRecallAll CallCancelA 4586 CommunicatorSystem BusyPageLock OnREDBACK A 45868 Zone CommunicatorVersion 1.1StoreRecallAll CallCancelA 4586 CommunicatorSystem BusyPageLock OnREDBACK A 45868 Zone CommunicatorVersion 1.16 7 8DIP Switches 6-8Set the PagingOff Off OffConsole IDIDOn Off OffOn On OffOff On OffOff Off OnOn Off OnOn On OnOff On On78123456 |
Related manuals for Redback A 4585
manualsdatabase
Your AI-powered manual search engine