Redback A 4585 Operating Manual
Also see for A 4585: Operating manual
                    | |
Contents
| 
Redback® A 4585 Zone Paging Systemwww.altronics.com.auRedback® Proudly Made In Australia61.5 REAR PANEL CONNECTIONSFig 1.5A shows the layout of the A 4585 rear panel.Fig 1.5A1 24V DC InputConnects to a 24V DC input with at least 1 amp current capacity. (Please observe the polarity)2 24V Battery BackupConnect a 24V backup supply to these terminals. (Please observe the polarity)3 DC fuse (2A M205)This fuse protects the internal power supply. Replace with 2A rated fuse only.4 24V DC Switched OutputA 24V output is provided which operates in a normally closed and normally open condition.This is activated whenever a zone is paged or when an evac input is triggered (see dip switch settings).5 PA Out RCA ConnectorsConnect these outputs to the input of the paging amplifier6 BGM Out RCA ConnectorsConnect these outputs to the input of the background music amplifier7 BGM In RCA ConnectorsConnect these inputs to the output of the background music source such as a CD player.8 Evac In RCA ConnectorsConnect these inputs to the output of an evacuation tone generator.9 Emergency input Vox LevelUse this trimpot adjustment to change the vox level for the emergency input.10 A 4575 RJ45 inputUse this input to connect to the output of the A 4575 Alert/Evac controller.11 RJ45 connectors for paging consolesThese RJ45 ports connect to the A 4586 zone paging consoles.NOTE: A maximum of two A 4586 microphone paging consoles may be connected to each port.OverviewManufactured in Australia By Altronic Distributors Pty. Ltd.FromBGMAMPLRLRBGM Out24VSwitchedOutN/ODC FUSE(1A M205)From24VBATTERY24V DCINA 4575 InputN/C FromPAAMPZones1 2 3 4 5 6 7 81Paging Stations3 41 2+ -+ -2345678910111213141516100V Switching - 1 AMP SYSTEM - Connect PA amp 100V output to “From PA AMP” Terminals2 AMP SYSTEM - Connect PA amp 100V output to “From PA AMP” terminals and BGM amp 100V ouput to “From BGM AMP terminals.Connect Zone amplifier speakers to ”+” and “-” terminals.Connect Zone amplifier line level inputs to “+” , ” - ” and “ ” terminals.Preamp Switching -DIP Switch SettingsSW123-8On OffSingle Amp ModeNot UsedDual Amp ModeLine Level Speaker Level+- +- +- +- +- +- +- +-+-+-+-+-+ - - ++- - +www.altronics.com.au+ +_ _ PA Out BGM Input Evac InputEvac VoxSensitivity+ _ + _1 2 3 4 5 6 7 8ON1 2 3 4 5 6 7 81 2 3 4 5 6 7 8ONDown is ON.151 2 3 4 5 6 7 8 9 10 11 121314 |
Related manuals for Redback A 4585
manualsdatabase
Your AI-powered manual search engine