Regency GF900L-NG Owners & Installation Manual

34 Regency GF900L Gas FireplaceINSTALLATION1. Remove faceplate, inner door frame, and glass door if already installed - see instructions in this manual.2. Remove two (2) screws in locations shown below to remove front trim piece.3. Reverse steps to reinstall.1. Remove front trim piece - see instructions above.2. Remove two (2) screws in locations shown below to release panel clips.3. Remove panels by sliding out.4. Reverse steps to reinstall.Front Trim PiecePanel Clip ScrewLocationsPanel ClipDiagram 1 - Front Trim Screw LocationsINNER PANEL REMOVAL / INSTALLATIONFRONT TRIM REMOVAL / INSTALLATION