Regency I35-NG Owners & Installation

12 Regency I35 Gas Inbuilt FireplaceINSTALLATIONNotchE)02-45BracketA)02-65The bottom right edge of Log G)02-48 mustsit snugly against the bracketSide ViewG)02-48E)02-45F)02-4711) Position notch in Front Right Log G)02-48on Log F)02-47 and push the bottom rightedge against the bracket on the burnertray.G)02-4812) Test fire to ensure proper light off. Ensureflame flows smoothly from one end of theburner to the other. If there is any flamehesitation, check the area for any blockageof the burner port.CutoutNotchF)02-47E)02-45A)02-6510) Place the notch in Center Log F)02-47 overLog E)02-45 and across the cutout on LogA)02-65.Installation of Kit 486-930:1) Carefully remove the logs from the box andunwrap them. The logs are fragile, handlewith care - do not force into position.2) Sprinkle the embers on the front, left andright sides of the firebox base.3) Place Side Log 02-50 on the right side ofthe grate on the firebox base.Position log as desired ensuring the logDOES NOT interfere with the flame. Possiblepositioning shown in diagrams below.4) Place Side Log 02-52 on the left side of thegrate on the firebox base.Position log as desired ensuring the logDOES NOT interfere with flame. Possiblepositioning shown in diagrams below.02-5002-5002-5002-5202-5202-52Example 1Example 2Example 3Example 1Example 2Example 35) Test fire to ensure proper light off. Ensureflame flows smoothly from one end of theburner to the other. If there is any flamehesitation, check the area for any blockageof the burner port.