Regency IG35-NG Owners & Installation Manual

Also see for IG35-LPG: Owners & installation manual

Regency IG35-NG Owners & Installation Manual Manual pdf 13 page image

13Regency IG35 Gas Inbuilt FireplaceThe "02" refer numbers (i.e. 02-65) aremolded into the rear of each log.1) Carefully remove the logs from the box andunwrap them. The logs are fragile, handlewith care - do not force into position.2) Sprinkle the embers on the front, left andright sides of the firebox base.LOG SETINSTALLATIONRead the instructions below carefully andrefer to the diagrams. If logs are brokendo not use the unit until they are replaced.Log kit #730-935 contains the following:a) 02-65 Rear Logb) 02-56 Middle Left Logc) 02-44 Front Left Logd) 02-46 Left Top Loge) 02-45 Front Right Logf) 02-47 Center Logg) 02-48 Middle Right Logh) Embers 902-151i) Lava 902-154A)02-653) Place Rear Log A)02-65 on the two pins onthe rear log support.4) Place the Middle Left Log B)02-56 on thetwo pins from the rear left side.6) Place Front Left Log C)02-44 onto the 2front pins as shown.Embers EmbersB)02-565) Place lava rock in front of middle left log asshown in the picture.C)02-44D)02-46 B)02-56A)02-657) Place the Left Top Log D)02-46 on the pinon Log B)02-56 and on top of the cutouton Log A)02-65.C)02-448) Place Front Right Log E)02-45 on the twopins as shown.9) Place the lava rock in the area betweenthe left and right logs, leaving a space inthe middle for log (F) 02-47.Ensure that the lava rocks are not placeddirectly over the burner ports.E)02-45Lava RockLog kit #486-930 contains the following:a) 02-50 Side Logb) 02-52 Side Logc) Embers 902-151d) Lava 902-154Installation of Kit 730-935:INSTALLATION