Regency L850B Owners & Installation

Montrose Woodfire13installation6. Before the next steps ensure all clearances/installation codes have beenmet. Test the fan for proper operation.7. Note ventilation at top of outer flue where it meets the cowl. It must bevented to allow heat to escape.Note that 8" skin will be shorter than 10" skin at top. This is fine as it allowsthe 8" skin to vent into the outer skin and cowl.10" galvanized flue skin over ventilation plate.Note tab on either side-bent up to secure flue via self drilling screwsAt this stage of the installation the unit is installed with the flue systemand any optional kits. The next step is to install and set the nailingflanges in the correct position to accommodate the front wall framingand finishing for BOTH THE FACEPLATE AND CLEAN EDGE FRAME.