Regency P36D-NG2 Owners & Installation

Regency P36D-NG2 Owners & Installation Manual pdf 13 page image

Regency ® P36D Gas Log Fireplace 13INSTALLATIONFLUEING ARRANGEMENTS - HORIZONTAL TERMINATIONSSIMPSON DURA-VENT DIRECT VENT GS SYSTEM andREGENCY ® DIRECT VENT SYSTEM (FLEX)The diagram shows all allowable combinations of vertical runs with horizontal terminations, using one 90 o elbow (two 45 o elbows equalone 90 o elbow).Note: Must use optional flue adapter (Part # 510-994) when using Simpson Dura-Vent pipe.Simpson Dura-Vent4" (102mm) inner diameter6-5/8" (168mm) outer diameterRegency ® Flex Vent4" (102mm) inner diameter6-7/8" (175mm) outer diameter• Maintain clearances to combustibles as listed in section "Clearances."• Horizontal flue must be supported every 3 feet (0.9 meters).• Firestops are required at each floor level and whenever passing through a wall.A flue guard should be used wheneverthe termination is lower than thespecified minimum or as per localcodes.Note: Regency ® Co Axial Flue System(Flex) is only approved forhorizontal terminations.