Regency PG121-NG1 Owners & Installation

Also see for FireGenie PG121-LPG1: Owners & installation manual

Regency PG121/PG131 Zero Clearance Room Sealed Gas Fireplace31MAINTENANCEINSTRUCTIONSAny maintenance required accessing theglass door of the unit must be performedby an authorized service person.1) Always unplug the power cord beforecleaning. For relighting, refer to lightinginstructions. Keep the burner and controlcompartment clean by brushing and vacu-uming at least once a year. When cleaningthe logs, use a soft clean brush as the logsare fragile and easily damaged.2) Clean glass (never when unit is hot), appli-ance, louvres, and door with a damp cloth.Never use an abrasive cleaner. The goldlouvres (and optional gold door) may bescratched if abrasives are used to cleanthem.The heater is finished in a heat resistantpaint and should only be refinished withheat resistant paint (not with wall paint).Regency uses StoveBright Paint - MetallicBlack #6309.3) Make a periodic check of burner for properposition and condition. Visually check theflame of the burner periodically, making surethe flames are steady; not lifting or floating.If there is a problem, call an authorizedservice person.4) The appliance and flueing system must beinspected before use, and at least annu-ally, by an authorized field service person,to ensure that the flow of combustion andventilation air is not obstructed.During the annual service call, the burnersshould be removed from the burner trayand cleaned. Replace the embers - do notblock the pilot or burner ports.5) Keep the area near the appliance clear andfree from combustible materials, gasolineand other flammable vapours and liquids.General Flue MaintenanceConduct an inspection of the flueing systemsemi-annually. Recommended areas to inspectas follows:1) Check the Flueing System for corrosion inareas that are exposed to the elements.These will appear as rust spots or streaks,and in extreme cases, holes. These com-ponents should be replaced immediately.2) Remove the Cap, and shine a flashlightdown the Flue. Remove any bird nests, orother foreign material.COPY OF THE LIGHTING PLATE INSTRUCTIONSOPERATING INSTRUCTIONSPart #: 918-332a (for ECS units, except for FG38)Colours: Black on Grey, except for parts indicated as being Red.Size: 100%Feb. 8/06: Changed AG 601 to AS5601-2004 as per Paul Watters.