Regency Sunrise E33S-NG1 Owners & Installation Manual

Also see for Sunrise E33S-LP1: Installation manual Owners & installation manual

Regency ® E33S-1 Sunrise Gas Insert 33MAINTENANCEFAN REPLACEMENT8) Remove the base cover by lifting up from the back and maneover out.6) Remove the burner by undoing the 2 screws shown. Carefully lift theburner up and out ensuring not to spill glass crystals.7) Carefully set aside the burner and glass crystals.Base CoverMAINTENANCE1) Turn the unit off and allow it to cool down to room temperature.2) Disconnect the power source and turn off the gas supply to theinsert.3) Open the bottom louver.5) Remove the glass door.a) Remove the 2 screws shown below at the bottom of the glassdoor.b) Swing the door out 45 o from the bottom and lift up andout.4) Remove the door frame by lifting out from the bottom and lift up offthe glass door.Door Frame Glass DoorBurner