ETHERLINK II - Repeater ManualPage 55 of 106For example:CO_PM> - the device is in the Master mode ( the Performance Management menu).4.6.2 General Commands4.6.2.1 commandAfter the command is entered the device displays the help menu.4.6.2.2 commandThe < LINKCLEAR > command closes current virtual link connections.4.6.3 Performance management menuAfter typing “1” in the main menu and pressing, the following message is displayed:Performance management activatedEnter to return to MAIN, or for HELP information4.6.3.1 commandType and the monitor lists all available commands in the performance sub-menu:RR_01_PM>H-------------------------------------------------------------------------------Type 'H [command]' to get additional help on [command]TCPIP Show TCP/IP statisticsTCPIP C Show TCP/IP statistics continuouslyMAC Show MAC Rx/Tx statisticsMAC C Show MAC Rx/Tx statistics continuouslyG826 Display xDSL G.826 statisticsG826 C Display xDSL G.826 statistics continuouslyRESETG826 Reset G.826 statisticsNETSTAT Show network interfaces statisticsRESETNETSTAT Reset network interfaces statisticsLINKCLEAR Exit all local connectionsM Return to Main MenuH Show available commands-------------------------------------------------------------------------------RR_01_PM>
