Saab R5 Supreme Operation & Installation Manual

Also see for R5 SUPREME AIS: Instruction Operation & installation manual Operation & installation manual Installation Short Instruction Installation Short Instruction

Contents

Saab R5 Supreme Operation & Installation Manual Manual pdf 62 page image

R5 SUPREME - Navigation SystemOPERATION7000 118-301, A3 Page 625.7 Status BarThe top of the screen on the R5 SUPREME CDU always displays a summary of thesystem‘s status.Figure 26 – Status BarThe left part of the status bar can either show the current position in latitude and longitude,or the name of the next waypoint in the currently active route. This is configurable with the―Status Information‖ parameter described in section 4.2.1. The status icons are displayed inthe middle of the status bar and on the right the current time and currently used RAIM levelis displayed. The time is either UTC or local (LOC) depending on the time configurationparameters described in section 4.2.8.5.7.1 Status IconsThe status icons that can be shown in the R5 Navigation System are:Unread DGPS messageActive alarmsNavigating without differential corrections.Using differential correction applied through User Port 1.Using differential correction applied through User Port 1, Integrity Alert.Using correction from internal radio beacon receiver (DGPS version)Using correction from internal radio beacon receiver (DGPS version), Integrity AlertUsing differential corrections from SBAS.Using differential corrections from SBAS, Integrity Alert.No valid position information.No communication with the R4 Navigation Sensor.HDOP status indication (active if HDOP is above 4).Navigation Sensor configured to use differential corrections but no differentialcorrections are used.Current position Status icons Current RAIM LevelCurrent time