STARTCALCCLEAN3 When the display shows START CALC CLEAN, press the OK button tostart the descaling procedure. Remove the hot water dispensing spout ifpresent.- The display reminds you that you have to insert the carafe.- The display reminds you that you have to open the milk dispensingspout.REMOVEFILTER- The display reminds you that you have to remove the AquaCleanfilter.Note: You can press the escape button to skip descaling. If you want tostart the descaling procedure later, press the MENU button, select MENUand scroll to select DESCALING. Press OK to confirm.4 Pour the descaling solution into the water tank. Fill the water tank withfresh water up to the CALC CLEAN level indication. Place the water tankback into the machine. Press the OK button to confirm.- The first phase of the descaling procedure starts. The machine startsdispensing the descaling solution at intervals.- The display shows the descaling icon, the phase indication and theduration. This first phase takes 20 minutes.5 Let the machine dispense the descaling solution until the water tank isempty.6 Remove the water tank and rinse it.MAXCALCCLEANCALCCLEAN127 Fill the water tank with fresh water up to the CALC CLEAN levelindication. Place the water tank back into the machine and press OK.8 Remove and rinse the milk carafe. Fill the milk carafe with water up to theMIN level indication. Insert the milk carafe into the machine and open themilk froth dispensing spout.9 Remove and empty the container and place it back under the coffeedispensing spout. Press OK to confirm.10 The second phase of the descaling procedure starts, which is the rinsingcycle. This phase takes 3 minutes. The display shows the rinsing icon andthe duration of the phase.Note: If the water tank is not filled up to the CALC CLEAN level, themachine may require another rinsing cycle.11 Wait until the machine stops dispensing water. The descaling procedureis finished when the tick appears on the display.22 English