Saeco IPERAUTOMATICA PREMIUM D.A. 3P2016 Operation And Maintenance Manual

English358DISPLAY Description1.23.2. It allows to enable or disable the beverage keys.By pressing a disabled key during operation, the message "NOT AVAILABLE" will bedisplayed.Enable Multiple Bev.1.23.3. enables the free-of-charge dispensing of the multi beverage, even if the machine works uponpayment.If the parameter is set on NO, machine settings apply to the multi beverage.Free1.24. Enables selection of whether the entries of the programming menu should be shown fully oronly partially.Complete menus1.25. It enables creating a group of 2 instant product containers.The groups of containers can be used when a higher capacity of instant powder is required for aparticular product (e.g. when chocolate is largely used in a certain location, 2 chocolate powdercontainers can be dedicated accordingly).The machine software will be responsible for alternatively starting the two powder motors, toguarantee equal product consumption in the 2 containers.To use the instant product groups proceed as follows:enter the System Management through the Groups optionenable groups managementselect the pair of containers you would like to group togetherprogramme the beverage recipe by introducing one of the 2 instant products that have been grouped.Grouping Powders1.25.1. Enables the instant product containers groupsEnable1.25.2. Choosing the powder motor pair to be grouped togetherGrouping Powders1.26. It allows selecting the current model of the vending machine.The vending machine model is specified on the label located in the inside of the right-handside panel.VM Model1.27. Management of default values for machine configurations.The user can create and recall their own configuration.Default Menu1.27.1. It allows reverting the programmable parameters to factory preset values.This operation does not reset the product counter.Factory default1.27.2. Management of the configuration which has been created by the userCustom Default1.27.2.1. Restore on machine the configuration saved by userRead Custom1.27.2.2. Saving the user machine configurationWrite Custom1.28. System InfoThis option allows accessing a page showing the overall machine configuration.The display shows the following information:FIRST ROW: Sw version ("x.yy.zz" format) / Program CRC ("abcd" format)Example: "SW v1.02.12/087c"SECOND ROW: Boot loader version ("xx" format) and name of the file searched for by theboot loader on the USB key (".s19" extension not displayed)Example: "Boot 08SAE_DA5P"THIRD ROW: Memory version ("xxx.yyy." format) / Content CRC ("zzz" format)Example: "Mem 123.456.789"System Info2. The entries of the PAYMENT SYSTEMS are:PAYMENT SYSTEMS…