16ENGLISHDisplay Setting Value DescriptionSTANDBY180’60’30’15’Stand-by time 15 minutes Stand-by time setting.DISPLAYCONTRAST Contrast average Display contrast setting.WATERHARDNESS4321Water hardness 4 (very hardwater)Water hardness setting. For further details, pleaserefer to the “5.3.1 Water hardness measurement andsetting” chapter.WATERFILTER0/8FILTER0/8FILTER ON AquaClean waterfilter to be installed AquaClean settings. For further details, please referto the “10.2 AquaClean water filter” chapter.8.2 Changing the default settingsIt is possible to customise the machine functions through the programming menu. Themachine must be turned on and ready to work.If necessary, refer to the “8.1 List of default settings” chapter.> Press the MENU button and scroll through functions list to select the function whosesettings are to be modified:Note: the images at the side refer to a sample function.> Press the OK button to select the desired function.Once selected:> Press the UP button to increase the value.> Press the DOWN button to decrease the value.> Press the OK button to confirm the change.When the change has been implemented, the OK message will be displayed.The modified but unconfirmed values will not be stored.> Press the ESC button to exit the programming function.The machine automatically exits the programming mode if no button is pressed for3 minutes.8.3 Reset to the default settingsIt is possible to restore the default settings through the programming menu. Themachine must be turned on and ready to work.> Press the MENU button and scroll through functions list to select the RESET function.> Press the OK button to select the function.When the change has been implemented, the OK message will be displayed.> Press the ESC button to exit the programming function.The machine automatically exits the programming mode if no button is pressed for3 minutes.9. TroubleshootingThis chapter summarises the most common issues that might concern your machine.If the following information is insufficient to solve the problem, please refer to the FAQpage of the www.saeco.com/support website, or contact the Philips Saeco hotline.Contacts are included in the warranty booklet supplied separately or can be found atwww.saeco.com/support.The machine is colour coded for easier interpretation of the display signals.The colourcode of the symbols is based on the traffic light concept.9.1 Alarm signals summary: red displayDisplay Description ActionPut back the drip tray and coffeegrounds drawer; close the servicedoor.Read the “7.1.1 Machine cleaning when needed”chapter to restore the components to their properplaces.DISPLAYCONTRASTRESETIncanto_CMF_EN-IT-DE_Rev01.indb 16 27/03/15 09:55