Saeco Lirika Operating Instructions Manual

Also see for Lirika: User manual

• 27 •Machine Installation - Service Provider ManualA = Soft waterB = Hard water (standard)C = Very hard water2 Immerse the "INTENZA+" water fi lter vertically in cold water(with its opening positioned upwards) and delicately press itssides so as to let the air bubbles out.3 Remove the tank from the machine and empty it. Removethe small white fi lter from the tank and store it in a dry placesheltered from dust.4 Put the filter into the empty tank. Press it to its limit stop.5 Fill the tank with fresh drinking water and reinsert it into themachine.6 Switch to programming mode as described in section 10.1.YELLOW7 Press the “ ” button (24) until the following menu is dis-played:YELLOW8 Press the “ ” button (18) to select “ON” and press the “” button (24) to confirm.9 Exit the programming menu and dispense about half thewater tank content to activate the fi lter.10 Fill the water tank again up to the MAX level with fresh drink-ing water.