Saeco Lirika Operating Instructions Manual

Also see for Lirika: User manual

• 32 •Machine Installation - Service Provider Manual10.4 Setting the PASSWORDThe PASSWORD must be set by the service provider in order toprevent access by unauthorised personnel who could change themachine settings and cause malfunctions.To set the PASSWORD, proceed as follows:1 Switch to programming mode as described in section 10.1.YELLOW2 Press the “ ” button (24) until the following menu is dis-played:PASSWORDYELLOW3 Press the " " button (18) or the " " button (20) to select"YES".PASSWORDYELLOW4 Press the " " button (24) to confi rm.PASSWORDCHANGE PSWYELLOW5 The option "CHANGE PSW" will be displayed, which will allowthe password to be set.6 Press the “ ” button (21) to confi rm and to set the pass-word.SET PSWCONFIRM0 0 0 0YELLOWTo enter the password:7 Press the " " (18) or " " (20) button to set the desirednumber.8 Press the “ ” button (24) to move on to the next number(when it gets to the end it will start again from the beginning).9 Repeat steps 7 and 8 until the set password has been entered.10 Press the " " button (21) to confi rm the password and toexit the menu.Note: You can exit the change menu at any timewithout saving the setting by pressing the “ ”button (22).Note: If "NO" is selected from the "PASSWORD"menu, the saved password will be cancelled.PASSWORDYELLOW