Saeco MOLTIO FOCUS HD8767 Quick Start Manual

Contents

Saeco MOLTIO FOCUS HD8767 Quick Start Manual Manual pdf 1 page image

Push gently on the edge of the water tank door to releasethe hand grip. Remove the tank by pulling the hand grip. Touse without water filter, rinse tank with water. Fill with freshwater up to MAX mark. Place water tank into machine. Toinstall water filter see user manual.NOTE: Only use cool fresh water, any other liquid may causedamage.Remove coffee bean hopper lid. Slowly pour beans intohopper. Replace lid.NOTE: Only use coffee beans. Ground, instant and flavoredcoffees may damage the machine.QUICK START GUIDEMOLTIO FOCUSHD8767/47PLEASE NOTE: OUR MACHINES ARE TESTED WITHCOFFEE AT THE FACTORY TO ENSURE HIGHQUALITY STANDARDS. WHILE MACHINES ARECLEANED THOROUGHLY AFTER TESTING, INSOME CASES, COFFEE GROUNDS MAY REMAIN INTHE MACHINE.FOR FULL INSTRUCTIONS, PLEASE REFER TO THEUSER MANUAL1BEFORE FIRST USE2Switch power button on back of machine to the “I” or ON position.Turn machine on by pressing “ ” button on control panel.21SET UPCONTROL PANEL QUICK REFERENCEFor a full understanding of functions, see the user manual.24. Espresso brew button25. Coffee brew button26. Steam / hot water button27. "Aroma" - Pre-ground coffee button28. "MENU" button29. ON/OFF buttonTROUBLE SHOOTINGQ: Why isn’t my coffee coming out hot enough?A: Cups may be cold. Preheat cups with hot water prior to dispensing coffee.Q: Why is my coffee coming out so weak?A: The machine automatically adjusts itself after brewing a few cups of coffee tooptimize the extraction of the coffee to the compactness of the ground coffee.We recommend brewing 3-5 espressos before drinking to allow for thisadjustment process. Refer to the "Saeco Adapting System" in the user manualfor more information.A: The coffee may be too coarse. Change the coffee blend or adjust the grind.Finer coffee grounds result in stronger tasting coffee. Refer to the “Adjustingthe ceramic coffee grinder” in the user manual for more information.Q: Why is my machine leaking water/coffee?A: Sometimes water is drained automatically by the machine into the driptray to manage the rinsing of the circuits and ensure optimum machineperformance.A: The dispensing spout may be clogged. Clean the holes in the dispensing spout.Q: Why isn’t the machine filling up my cup?A: The machine’s coffee lengths can be programmed. Enter the beverageprogramming menu and adjust the coffee length setting to your liking forevery beverage. See "Adjusting the coffee length" section in the user manual.For more troubleshooting please refer to the User Manual.NEED ASSISTANCE:If you have any questions or concerns, we are always available toassist you.Please call us direct at 1-800-933-7876 or visit us atwww.philips.com/saeco6.1.201542194603166126 2924 2725 283 Once machine turns on, it will indicate a priming cyclemust be started. Place a container under the steam wand.421946031661_MoltioFocus_HD8767_47_.indd 1 9/10/15 3:52 PM

/ 2

Related manuals for Saeco MOLTIO FOCUS HD8747