Turn the selector to the “ ” position.Caution:It may happen that the selector can not be switched as it isblocked by coffee beans. In this case gently move the selectorback and forth until the beans are released.Lift the sides of the coffee bean hopper with both hands. Fill the hopper withwhole beans.Press the ” ” button to start the cycle. The machine willstart the automatic priming by dispensing some water throughthe steam wand. When the machine stops dispensing, a warmup cycle will begin automatically.Once heated, a 1-minute rinse/self-cleaning cycle with fresh water will beginautomatically. Place a container under dispensing spout to catch water.Before using the machine for the first time a manual rinse cycle must be initialized.Place container under dispensing spout. Select the pre-ground coffee brewingfunction by pressing the “ ” button. Press the “ ” button. Wait for dispensing tostop. When it has stopped, repeat this operation 2 more times.NOTE: Do not add pre ground coffee into the machine during this process.Place a container under the steam wand and press the “ ” button.Press the “ ” button to start dispensing hot water through the steam wandDo this until the "no water" icon appears in display.Remove any beans from the coffee bean hoppercompartment, then insert the hopper into thecompartment.Slide the selector switch to the “ ” position.Fill the water tank again up to the MAX level indicator.Place a cup under dispensing spout and press the “ ” button to grind anddispense espresso.Repeat Step 2 three-five times.Your machine is now ready to brew coffee!4561243OPTIMIZE YOUR COFFEETo optimize coffee extraction to compactness of the ground coffee, brew 3-5 cups ofespresso and discard BEFORE drinking.123571COFFEE BEAN SELECTIONCHANGING COFFEE BEANS1USING THE STEAM WAND TO FROTH MILK2Fill a frothing pitcher 1/3 of the way with cold milk.Immerse the steam wand into the milk. Press “ ”button then press the “ ” button to start dispensingsteam. Steam will continue to dispense for 3 minutesor until you press the “ ” button to stop dispensing.After each use, clean steam wand as described in the user manual.3Yellow Press the “ ” MENU button and scroll the pages bypressing the “ ” MENU button until the following iconis displayed.Press the “ ” button or the “ ” button to select the type of coffee beans inthe coffee bean hopper. Press the “ ” MENU button to confirm the setting.To exit, press the “ ” button. The machine is now programmed to optimizethe grinding of your coffee beans.421This function allows you to optimize the grinding for selected types of coffee beans.BREWING ESPRESSO AND COFFEEUSING WHOLE BEANSTo brew an espresso or a coffee, press the “ ” button to select the desiredaroma. Press the “ ” button for an espresso or “ ” button for a coffee.To brew 1 cup of espresso or coffee, press the desired button once. To brew2 cups of espresso or coffee, press the desired button twice consecutively.After the pre-brewing cycle, coffee begins to pour out of the dispensing spout.Coffee brewing automatically stops when the pre-programmed level is reached;press the “ ” button to stop it earlier.23421946031661_MoltioFocus_HD8767_47_.indd 2 9/10/15 3:52 PM