Saeco Moltio HD8768 AMF Manual

Contents

Brew group:How to remove:1. Turn OFF the machine.2. Open the service door.3. Remove the coffee ground drawer.4. Remove the coffee ground container.5. Press the PUSH button and pull the brew group out.How to insert, set in rest position:Important! If the brew group does not stand in the rest position, it cannot be reinserted.How to set the brew group in the rest position1. The lever must be in contact with the brew group base. Push it down.2. The two arrow heads on the side of the brew group will now match.3. The locking hook on the side of the brew group needs to be in uppermost position. Push itupwards until you hear a soft click.Display messages during descaling:StartprocessAdd thedescalingsolution.The machine is inthe descalingcycle. Itdispenses atintervals.The descalingcycle is finished.Rinse and fill thewater tank withfresh water.The machineis ready tostart rinsingcycleDuring descaling cycle: During rinsing cycle:Start descaling:Refill thetank andrepeatrinsing cycle.The rinsingcycle iscompletedand you canexitThe machinewarms upand performsan automaticrinse cycle.• The complete process consists of 3 cycles; One descaling cycle with the specific Saeco decalcifier CA6700 and two rinsing cycles with fresh water.• Before starting the descaling process: Remove the automatic milk frother, empty the drip tray and remove any extra placed water filter (example. INTENZA+) from the watertank.Compact description descaling process:Start descaling:1. Press the “Menu" button until the CACL CLEAN symbol appears.2. Press the “Espresso ” button to start the descaling . The descaler symbol appears on the display.Descaling cycle:3. Take out the water tank. Pour the entire bottle of Saeco descaling solution in the water tank.4. Top up the water tank with fresh tap water to the Calc Clean line. Place the water tank back into the machine.5. Place a bowl underneath the steam/hot water wand and the dispensing spout.6. Press the “Espresso” button to start the descaling cycle. The machine will start dispensing the descaling solution at intervals. The bar on the display shows the progress. Thistakes about 25 minutes. Note: The descaling cycle can be paused by pressing the “Espresso” button .To resume the cycle, press the “Espresso” button again.7. When the mixture of descaling solution and water has been used up, the ‘water tank empty’ symbol appears on the display.Rinsing cycles:8. Clean the water tank thoroughly, fill it with fresh water to the MAX and place it back. The ‘start rinsing’ symbol appears on the display.9. Place back the bowl. Press the “Espresso ” button and the machine starts the first rinsing cycle.10. When the ‘water tank empty’ symbol appears on the display, repeat steps 8-9 to start the second rinsing cycle.11. When it is finished the ”Calc Clean ready” symbol appears to indicate that the descaling process has been completed. Exit the descaling process.Important note: If the ‘water tank empty’ symbol appears on the display instead of the ‘Calc Clean ready’ symbol, you did not fill the water tank up to MAX level. Refillthe water tank up to MAX level and perform another rinsing cycle. Repeat steps 8-9 until the ‘Calc Clean ready’ symbol appears. You may have to do this several timesbefore the ‘Calc Clean ready’ symbol appears.12. If the machines shows the prime circuit symbol, first start priming the circuit before brewing any coffee.Remove Bean containerand detach: To remove pushthe selector to the unlock positionLift the container with both hands.To detach the two parts of thecoffee bean container, turn it andpush down the small hooks in thebottom.Automatic milkfrother: Insert theAutomatic Milk Frother inthe steam wand seat.Make sure that it ispositioned correctly. If youcannot insert it, rotate thechrome cover.

/ 3

Related manuals for Saeco Moltio HD8768 AMF