Saeco OTC SERIES Service Manual
                                                              | |
Contents
| 
INCANTO 03 BRIEF INSTRUCTIONS1/33.1. Customer menu in the IncantoList of default settingsChanging the default settingsIt is possible to customise the machine functions through the programmingmenu. The machine must be turned on and ready to work.If necessary, refer to the “8.1 List of default settings” chapter.Press the MENU button and scroll through functions list to select thefunction whose settings are to be modified:Note: the images at the side refer to a sample function.Once selected:Press the UP button to increase the value.Press the DOWN button to decrease the value.Press the OK button to confirm the change.When the change has been implemented, the OK message will bedisplayed.The modified but unconfirmed values will not be stored.Press the ESC button to exit the programming function.The machine automatically exits the programming mode if no button ispressed for 3 minutes.Press the OK button to select the desired functionMAXMEDMINCOFFEETEMPDISPLAYCONTRASTON0/8FILTERFILTER WATERFILTER0/8180°60°30°15°STANDBYDisplay Setting Setting Value DescriptionCoffeetemperature average Coffee brewing temperature set-ting.Stand-bytime15 minu-tes Stand-by time setting.Contrast average Display contrast setting.Waterhardness4 (veryhardwater)Water hardness setting.AquaCleanwaterfilterto beinstalled AquaClean settings.P4321WATERHARDNESSDISPLAYCONTRAST>>>>>> |
Related manuals for Saeco AMF SERIES
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine