INCANTO 07 DISASSEMBLY2/9Unscrew the screwshown and removethe cover.Unscrew the screw shown Press the sides and remove the cover anddispenser. Insert as before to reassemble thedispenser in the rail and then the coverage.7.2. DispenserUnscrew the screws shownUnscrew the screws shown andremove the dispenserunlock where highlighted and re-move the cover in the dispenserRemove the insert the upper coverRemove the support KYB assy.and disconnect the flat cable.Remove the upper cover and remove the electrical andwater circuit connections.remove the block supportKYB assy.
