Saeco PICOBARISTO HD8924 User Manual

Also see for PICOBARISTO HD8924: Instruction manual

Contents

the display, the machine will eventually stop working properly. In this case,repairs are not covered by the warranty.Only use Saeco descaling solution to descale the machine. Saeco descalingsolution is designed to ensure optimal performance of the machine. The useof other products may damage the machine and leave residues in the water.You can buy Saeco descaling solution in the online shop atwww.saeco.com/care.The descaling procedure lasts 23 minutes and consists of a descaling cycle(20 minutes) and a rinsing cycle (3 minutes). You can pause the descaling orrinsing cycle by pressing the ESC button. To continue the descaling orrinsing cycle, press the OK button.Note: Do not remove the brew group during the descaling procedure.Warning: Do not drink the descaling solution or the waterdispensed during the descaling procedure.1 Remove the drip tray and the coffee grounds container, empty and cleanthem and put them back into place.2 Remove the automatic milk frother from the hot water/ steam dispensingspout.3 Place a large container (1.5 l) under the coffee dispensing spout.STARTDESCALING?23 MIN4 When the display asks 'Start descaling?', press the OK button to start thedescaling procedure.5 The display reminds you that you have to remove the AquaClean filter.Remove the filter and press the OK button.Note: You can press the escape button to skip descaling. If you want tostart the descaling procedure later, press the MENU button, select MENUand scroll to select DESCALING. Press OK to confirm.6 The display reminds you that you have to empty the drip tray. Press theOK button to confirm.7 Pour the descaling solution into the water tank. Fill the water tank withfresh water up to the CALC CLEAN level indication. Place the water tankback into the machine. Press the OK button to confirm.- The first phase of the descaling procedure starts. The machine startsdispensing the descaling solution at intervals.- The display shows the descaling icon, the phase indication and theduration. This first phase takes 20 minutes.8 Let the machine dispense the descaling solution until the water tank isempty.9 Remove the water tank and rinse it.21English