Saeco Royal HD8930 Operating Instructions Manual

Also see for New Royal HD 8930: Service manual

Contents

ENGLISH 156 Place a large container under the hot water wand.7 Hold the " " button pressed for 5 seconds to access the program-ming mode.8 To select the "MACHINE MENU" option, press the " " button.Press the " " button for access.9 Press the " " button until the "WATER MENU" option can be selected.Press the " " button for access.10 Press the " " button until the "ACTIVATE FILTER" option can be se-lected.Press the " " button for access.11 Press the " " button.Note: To quit the procedure press the “ ” button until the logo isdisplayed.12 Press the " " button to confirm the introduction of the new filter.13 Press the " " button to confirm.Wait until the machine stops dispensing the necessary water to activatethe fi lter.At the end of the cycle, remove the container that you had previouslyplaced under the hot water wand.Note: At the end of the procedure, the display automatically returns to theproduct brewing page. If the water filter is not available, insert the smallwhite filter previously removed (see step 1) into the tank.MENUBEVERAGE MENUMACHINE MENUWATER MENUHARDNESSENABLE FILTERACTIVATE FILTERACTIVATE FILTER?ACTIVATE FILTERINSERT FILTER.FILL THE TANKACTIVATE FILTERPLACE A CONTAINERUNDER THEWATER SPOUTACTIVATE FILTERACTIVATE FILTERMACHINE MENUGENERAL MENUDISPLAY MENUWATER MENUMAINTENANCEMACHINE MENUGENERAL MENUDISPLAY MENUWATER MENUMAINTENANCEDownloaded from www.Manualslib.com manuals search engine