ENGLISH 5reachable socket;• Provide for a minimum distance from the sides of the machine asshown in the illustration;• While switching on or off the machine, we suggest placing an emptyglass under the dispensing spout.Do not keep the machine at temperatures below 0°C. Frost may damagethe machine. Do not use the coffee machine outdoors.In order to prevent its housing from melting or being damaged, do notplace the machine on very hot surfaces and close to open flames.Storing the Machine - CleaningBefore cleaning the machine, turn it off by pressing the " " button andthen by switching the power button to "0". Finally, remove the plug fromthe socket.Keep the machine at its best, clean and store it properly.Since the machine uses natural ingredients to brew beverages (coffeebeans, water, milk, etc.), some residues of ground coffee or condensed wa-ter could be present on its supporting surface. For this reason we recom-mend to periodically clean both the visible parts of the machine and thearea beneath it.Before storing the machine we strongly recommend to clean it:- Water left in the tank and/or the water circuit for several days shouldnot be consumed. If the machine is going to remain inactive for a longtime, dispense water from the hot water wand and carefully clean theCappuccinatore (if supplied).- Turn off the power button and clean the machine. Finally, remove theplug from the socket. Wait for the machine to cool down.Never immerse the machine in water! Store it in a dry place, out of thereach of children. Keep it protected from dust and dirt.It is strictly forbidden to tamper with the internal parts of the machine.For thorough cleaning, the Cappuccinatore can be detached and disassem-bled and its parts can be put in a dishwasher (not professional type).The washing process in the dishwasher may cause the surface of the Cap-puccinatore parts to tarnish or the graphics to fade, especially if aggressivedetergents are used.This is a normal phenomenon and does not affect in any way the correctoperation of the milk system.MalfunctionIn case of failure, problems or a suspected fault resulting from the falling ofthe machine, immediately remove the plug from the socket. Never attemptto operate a faulty machine.For further information on troubleshooting and service, please refer to the"Troubleshooting" and "Service" chapters.Fire Safety PrecautionsIn case of fire, use carbon dioxide (CO 2) extinguishers. Do not use water ordry powder extinguishers.Downloaded from www.Manualslib.com manuals search engine