Saeco Syntia HD8836 Operating Instructions Manual

Also see for SYNTIA HD8836: Manual

Contents

• 17 •• It is recommended to clean the watertank daily.- Remove the small white fi lter in thewater tank and wash it under runningdrinking water.- Reposition the small white filter inits housing by gently pressing andturning it at the same time.- Fill the water tank with fresh drinkingwater.• Empty and clean the drip tray daily.Perform this operation also when thefl oat is raised.• Wash the brew group with lukewarmwater and carefully clean the upperfi lter.• Thoroughly wash and dry all the partsof the brew group.• Thoroughly clean the inside of themachine.• Make sure that the two reference signsmatch up.• The lever on the rear part of the brewgroup must be in contact with the base.Press the “PUSH” button to make surethat the brew group is in the correctposition.Lubricate the brew groupevery 30 days or after ap-proximately 500 brewing cycles. Thegrease to lubricate the Brew Groupcan be purchased at authorisedservice centres.• Lubricate the brew group guides usingthe supplied lubricant only.• Apply the lubricant evenly on both sideguides.• Insert the brew group in its seat until itlocks into place WITHOUT pressing the“PUSH” button.• Insert the coffee grounds drawer. Closethe service door.Brew Group• The Brew Group should be cleanedevery time the coffee bean hopper isfi lled, or at least once a week.• Turn off the machine by pressing theON/OFF button and remove the plugfrom the socket.• Remove the coffee grounds drawer.Open the service door.• To remove the brew group, pull it by thehandle and press the «PUSH» button.The brew group must be washed onlywith lukewarm water, no detergent/soap is necessary.• Also clean the seat of the tray everyweek through the openings on thebottom of the machine.