Saeco Syntia HD8836 Operating Instructions Manual

Also see for SYNTIA HD8836: Manual

Contents

• 5 •Danger of BurnsNever direct the steam/hot water wand towards yourself or others: Danger of scalding! Alwaysuse the handles or knobs provided.Machine Location - Suitable Location for Operation and MaintenanceFor best use, it is recommended to:• Choose a safe, level surface, where there will be no danger of overturning it or being inju-red.• Choose a location that is sufficiently well-lit, clean and near an easily reachable socket.• Provide for a minimum distance from the sides of the machine as shown in the illustration.• During machine turning on/off, it is recommended to place an empty glass under the dispen-sing spout.Do not keep the machine at a temperature below 0°C (32°F).Frost may damage the machine.Do not use the coffee machine outdoors.In order to prevent its housing from melting or being damaged, do not place the machine onvery hot surfaces and close to open flames.Storing the Machine - CleaningBefore cleaning the machine, turn it off by pressing the ON/OFF button, and then switch thepower button to “0”. Remove the plug from the socket.Wait for the machine to cool down.Never immerse the machine in water!It is strictly forbidden to tamper with the internal parts of the machine.Water left in the tank for several days should not be consumed. Wash the tank and fill it withfresh drinking water.If the machine will not be used for a long time, dispense water from the steam wand, and care-fully clean the Pannarello (if supplied), then turn it off and unplug it.Store it in a dry place, out of the reach of children.Keep it protected from dust and dirt.Since the machine uses natural ingredients to brew beverages (fresh ground coffee, water, milk,etc.), some residues of coffee ground or condensed water would definitely be present on itssupporting surface.For this reason we recommend to periodically clean both the visible parts of the machine andthe area beneath it.Servicing / MaintenanceIn case of failure, problems or a suspected fault resulting from the falling of the machine, imme-diately remove the plug from the socket.Never attempt to operate a faulty machine.Servicing and repairs may only be carried out by authorized service centers.All liability for damages resulting from work not carried out by professionals is declined.Fire Safety PrecautionsIn case of fire, use carbon dioxide (CO 2 ) extinguishers. Do not use water or dry powder extin-guishers.