Saeco Talea Giro Operation And Maintenance Manual

Also see for TALEA GIRO: Operating and maintenance manual Service manual Operation and maintenance manual Operation and maintenance manual Technical & service manual

Contents

Saeco Talea Giro Operation And Maintenance Manual Manual pdf 19 page image

192 34 6751Press the “PUSH” button toremove the Brew Group.Make sure the Brew Group is inrest position; the two referencesmust match.Wash the Brew Group withUXQQLQJZDWHU:DVK¿OWHUVcarefully.CLEANING THE BREW GROUPThe Brew Group must be cleaned at least once a week. Before removing the Brew Group, remove theFRIIHHJURXQGVGUDZHUDVVKRZQLQ¿JRQSDJH2QFH\RXKDYHZDVKHGDQGLQVHUWHGWKH%UHZGroup, insert the grounds drawer and close the service door.Make sure the components are inthe correct position.The hook shown must be in thecorrect position; to check itsSRVLWLRQ¿UPO\SUHVVWKH³386+´button.Insert the washed and dried BrewGroup.DO NOT PRESS THE “PUSH”BUTTON.Insert the grounds drawer andclose the service door.The lever on the rear part of thegroup must be in contact withthe brew group base.