Remove the water tank. Rinse tank with water and then fillwith fresh water up to the MAX mark. Place water tankback into machine. To install water filter see user manual.NOTE: Only use cool fresh water as any other liquid maycause damage.Remove the coffee bean hopper lid and slowly pour beans into hopper andreplace lid.NOTE: Only use coffee beans. Ground, instant and flavored coffees maydamage the machine.QUICK START GUIDEX-SMALL VAPOREHD8645/47SET UPPLEASE NOTE: OUR MACHINES ARE TESTEDWITH COFFEE AT THE FACTORY TO EN-SURE HIGH QUALITY STANDARDS. WHILEMACHINES ARE CLEANED THOROUGHLYAFTER TESTING, IN SOME CASES, COFFEEGROUNDS MAY REMAIN IN THE MACHINE.FOR FULL INSTRUCTIONS, PLEASE REFERTO THE USER MANUAL1421944059051CONTROL PANEL QUICK REFERENCEPlease refer to the control panel reference below for an understanding of functions18. “Double coffee” light19. Espresso button20. Temperature light21. No water light22. Coffee button23. Control dial24. Warning light25. ON/OFF button withmachine ready lightMake sure the control dial is on “ ” position. Pressthe “ ” on/off button to turn on the machine; the “ ”light will begin to flash quickly, indicating that the circuithas to be primed.BEFORE FIRST USE121 22 23 24 2518 19 20TROUBLE SHOOTINGQ: Why is my coffee so weak?A: The machine automatically adjusts itself after brewing a few cups of cof-fee to optimize the extraction of the coffee to the compactness of theground coffee. We recommend brewing 3-5 espressos before drinkingto allow for this adjustment process. Refer to the "Saeco Adapting Sys-tem" in the user manual for more information.A: The coffee may be too coarse. Change the coffee blend or adjust thegrind. Finer coffee grounds result in stronger tasting coffee. Refer tothe “Adjusting the ceramic coffee grinder” in the user manual for moreinformation.Q: Why is water/coffee leaking from machine?A: Sometimes water is drained automatically by the machine into the driptray to manage the rinsing of the circuits and ensure optimum machineperformance.A: The dispensing spout may be clogged. Clean the dispensing spout holes.Q: Why isn’t the machine filling up my cup?A: The machine’s coffee lengths can be programmed. For details on howto do this please refer to the user manual.For more troubleshooting please refer to the User Manual.NEED ASSISTANCE:If you have any questions or concerns, we are always available to assist you.Please call us direct at 1-800-933-7876or visit us at www.philips.com/saeco29/2015421944059051_HD8645_47_QSG.indd 1 9/3/2015 7:42:13 PM