34 ENGLISH10 When the green “ ” light starts fl ashing slowly, turn the controldial to the “ ” position. The red “ ” light turns on.11 Empty the large container and the drip tray and place them back.Rinsing Cycle 112 Rinse the water tank and fi ll it up to the MAX level with fresh water.Put it back in the machine.13 When the green “ ” light turns on, turn the control dial to the “” position. The machine will prime its internal circuits.14 After this, the green “ ” light starts fl ashing slowly. Turn thecontrol dial to the “ ” position.15 The machine dispenses water internally in the drip tray. It does notdispense through the hot water/steam wand.16 When the green“ ” light turns on, turn the control dial to the “” position. The machine now dispenses through the hot water/steam wand until the water tank is empty.Note:If you want to stop dispensing (for example to empty the container), turnthe control dial to the “ ” position. To restart dispensing, turn the controldial back to the “ ” position.