Saeco bravista espresso User Manual

Contents

2 Press the on/off button (green).,The on/off button flashes green slowly to indicate the machine is heatingup. When the on/off button lights up green continuously, it is ready toperform the next step.,The orange service indicator light flashes to indicate that no water hasbeen pumped into the system yet.3 Press the yellow lungo button. Water flows from the coffeedispensing spout.Note:The machine stops brewing automatically once it has dispensed thepreset coffee cup volume.Note: If the cup is full before the machine stops dispensing, you can stop thebrewing process by pressing the yellow lungo button again.Note:When the internal circuit is empty, the machine produces a hummingsound.When the machine dispenses water, it produces less loud hummingsounds.This is normal.4 Empty the cup and place it back under the coffee dispensing spout.5 Repeat steps 3-5 until the water tank is empty.Note:The orange service indicator light flashes to indicate that the water tankis empty.6 Fill the water tank up to the MAX indication.Note:The orange service indicator light stops flashing when you brew anotherbeverage.7 Empty the drip tray and waste water drawer. See chapter ‘Cleaningand maintenance’, section ‘Cleaning the used capsule drawer andwaste water drawer’.The machine is now ready for use.Using the machineAdjusting the drip tray heightThe machine can be used with a range of cup sizes. You can position thedrip tray at two different heights or even remove to suit the size of yourcup and the coffee variety you want to brew.Note:When you use an espresso cup, put the drip tray in the highest position.1 To remove the drip tray, grab it on both sides, tilt it upwards slightlyand lift it off the machine.ENGLISH10