Descaling the machineScale builds up inside the machine during use. It is essential to descale themachine when the service indicator light illuminates continuously.Only use the Saeco descaling solution to descale the machine. The Saecodescaling solution is designed to ensure optimal performance of themachine. You can buy the Saeco descaling solution (CA6700) online atwww.philips.com.Note:The use of other descaling products may cause damage to the machineand leave residues in the water.Never drink the water with descaling mixture that you pour into thewater tank or any water with residues that comes out of the machineduring the descaling procedure.Descaling procedureThe descaling procedure lasts 30 minutes and consists of a descaling anda rinsing cycle.Note: Do not interrupt the descaling or rinsing cycle and do not switch off themachine. During the descaling cycle, the descaling solution will be dispensedfrom the coffee dispensing spout in intervals. During the rinsing cycle withfresh water, water flows out of the coffee dispensing spout.1 Switch off the machine.2 Make sure that there is no capsule in the capsule compartment andthe capsule compartment opening lever is in closed position.3 Remove and empty the water tank, drip tray, waste water drawerand used capsule drawer.4 Pour the entire bottle of Saeco descaling solution (250ml) into thewater tank.5 Add water to the descaling solution in the water tank up to theMAX indication.6 Insert the waste water drawer and used capsule drawer into themachine.Note: Do not place the drip tray and metal cup tray into the machine.7 Place a bowl with a minimum capacity of 1 litre under the coffeedispensing spout to collect the descaling solution.8 Press the espresso button (white) and the lungo button (yellow)simultaneously for approximately 3 seconds until the orange serviceindicator light lights up.ENGLISH16