Safco 6683 Assembly Instructions Manual

NOTE: Determine which type of seat bottom you have. Seatbottoms have five threaded, two threaded or one threadedhole(s) on each side. Refer to assembly instructions accordingto type of seat bottom. All of the parts will NOT be used witheach version.ASSEMBLY INSTRUCTIONS FOR SEAT BOTTOMS WITHTWO THREADED HOLES ON EACH SIDERemove four screws mounting control mechanism to the seat.IMPORTANT: Save the screws for later use.Mount Armrest Bracket (A) under control mechanism withnotched side facing front of seat bottom. Align four holes incorners of armrest bracket with two threaded holes on eachside of seat bottom. Attach armrest bracket to seat bottomwith four Screws (H), Lock Washers (J) and Flat Washers(K)–but do not tighten screws completely.Align four holes in control mechanism with four holes in seatbottom. If control mechanism has two holes on each sidethat line up with two threaded holes in armrest bracket,secure with two Screws (H), Lock Washers (J) and FlatWashers (K). Secure control to seat bottom with screwssaved in Step 1, unless control mechanism has two holes oneach side that line up with two through holes in armrestbracket. If control mounting holes line up with through holes,place two 5mm Spacers (I) under front mounting holes ofcontrol and secure control with four screws saved in Step 1.Make sure all screws are securely tightened, including four forarmrest bracket.Align three slots in Left Armrest (B) with three threaded holeson left side of armrest bracket and attach with Screws (C),Lock Washers (J) and Flat Washers (K). Slide armrest todesired width, then tighten screws securely. Repeat with RightArmrest (G).Please Note: Fasteners should be checked periodically andtightened as necessary.For questions or concerns, please call the Safco Consumer Hot Line 1-800-664-0042available Monday - Friday 8:00 AM to 4:30 PM (Central Time) (English-speaking operators)A S S E M B L Y I N S T R U C T I O N SREAD THESE INSTRUCTIONS BEFORE STARTING! FOLLOW THE ASSEMBLY PROCEDURES CAREFULLYTOOLS REQUIRED: Phillips ScrewdriverPRODUCT WARRANTY REGISTRATION is available online at: www.safcoproducts.com36683-37MP: 1 of 6;05/046559.00PARTS LISTCODE DESCRIPTION QTY. PART NO.A Armrest Bracket 1 6683-20NCB Left Armrest 1 3499-02C 6-1.0 x 16mm Phillips Hex Head Screw 6 6683-22NCD 6-1.0 x 30mm Phillips Hex Head Screw 6 6683-23NCE 15mm Spacer 6 6683-32NCF Steel Spacer 2 6683-31NCG Right Armrest 1 3499-03H 6-1.0 x 16mm Phillips Pan Head Screw 6 6683-24NCI 5mm Spacer 2 6683-33NCJ 6mm Lock Washer 10 6683-29NCK 6mm Flat Washer 10 6683-30NCAdjustable Armrest Kit 6683241••Visit us on the web:www. safcoproducts.com•Remove and Save ScrewsHKKJJIGCABTwo Threaded Holes - Exploded Assembly ViewTwo Threaded Holes - Assembled View