Chapter 3: Connecting power42 To connect power3.3 To connect powerDo as follows:1. Connect the power cable to the ship’s 24 V DC supply according to therecommendations in the previous section.2. Connect the D-sub connector on the power cable to the DC input connectoron the terminal.For information on pin-out, see DC power input on page 47.For specifications of the DC input on the terminal, see SAILOR FleetBroadbandterminal on page 101.Note If you need a remote on/off function, connect the wires from pin2 (green wire) and 5 (orange wire) in the power connector to aswitch or similar which can connect/disconnect these two pins.See the next section for details.
