Contents - record of revisions
- related documents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- VHF radio with DSC Class A
- Figure 1-1: Controls on the front plate
- Accessories available
- Figure 1-2: System configuration, example
- Unpacking and initial inspection
- Figure 2-8: SAILOR 6090 Power Converter, dimensions
- Figure 2-10: SAILOR 6201 Handset with cradle
- Connectors
- Figure 2-11: Connections at the rear panel
- Table 2-3: Pin allocation, ACC connector
- Figure 2-12: NMEA interface description
- Table 2-4: Pin allocation, AUX connector
- Table 2-5: Pin allocation, CTRL connector
- Table 2-6: Pin allocation, LAN connector
- VHF and DSC antenna installation
- Figure 2-13: Antenna positioning 1/2
- Accessories
- Figure 2-15: SAILOR 6207 Connection Box for parallel handsets, mounting
- Figure 2-17: SAILOR 6207 Connection Box for parallel handsets, diagram
- Figure 2-18: SAILOR 6208 Control Unit Connection Box, mounting
- Figure 2-20: SAILOR 6208 Control Unit Connection Box, diagram
- General use and navigation
- Entering the MMSI number
- Contact for support
- Troubleshooting guide
- Warranty and returning units for repair
- A.1 Transceiver unit SAILOR 6222 VHF DSC
- Table A-2: Technical specifications, part 2
- A.2 General DSC specifications
- A.3 NMEA data rates and formats
- B.1 System configuration examples
- Figure B-1: System configuration, SAILOR 6090 Power Converter
- Figure B-2: System configuration, SAILOR N163S Power Supply
- Figure B-3: System configuration, SAILOR 6201 Handset and N420 DC Power Supply
- Figure B-4: System configuration, SAILOR 6201, GPS, ext. loudspeaker and alarms
- Figure B-5: System configuration, GPS and SAILOR 6270 External loudspeaker
- Figure B-6: System configurations, 2 SAILOR 6201 Handsets and a GPS
- Figure B-7: System configurations, extra handset SAILOR 6201 in SAILOR 6207
- Figure B-8: System configuration, SAILOR 6202 Handmic., SAILOR 6201 Handset, GPS
- Figure B-9: System configuration, GPS and SAILOR 6208 Connection Box
- Figure B-10: System configuration, GPS and SAILOR 6207 Connection Box
- Figure B-11: System configuration, CAN bus, SAILOR 6204 CSM, close to the VHF radio
- Figure B-12: System configuration, CAN bus, SAILOR 6204 CSM, not close to the VHF radio
- Figure B-13: System configuration, CAN bus, SAILOR 6204 CSM, far from the VHF radio
- Figure B-14: System configuration, CAN bus, 2 SAILOR 6204 CSMs, close to VHF radio
- Figure B-15: System configuration: CAN bus, 2 SAILOR 6204 CSMs, far from VHF radio
- Figure B-16: System configuration: CAN bus, 2 SAILOR 6204 CSMs, close to each other
- Figure B-17: System configuration: CAN bus, 2 SAILOR 6204 CSMs, close VHF, small bridge
- Figure B-18: System configuration: CAN bus, 2 SAILOR 6204 CSMs, in bridge wings
- Figure B-19: System configuration: CAN bus, 3 SAILOR 6204 CSMs, in bridge wings
- Figure B-20: System configuration: CAN bus, 4 SAILOR 6204 CSMs, in bridge wings
- Figure B-21: System configuration: CAN bus, 3 SAILOR 6204 CSMs
- Figure B-22: System configuration: CAN bus, 4 SAILOR 6204 CSMs
- Figure B-23: System configuration: Installation of LAN
- Figure B-24: System configuration: Installation of a printer
- Figure B-25: System configuration: Installation of an additional printer
- B.2 Cable requirements
- Table B-2: Cable specifications for cable 2
- Table B-4: Cable specifications for cable 5
- Table B-5: Cable specifications for cable 8 (AUX)
- Table B-6: Cable specifications for cable 8 (CTRL)
- Table B-7: Pin allocation, LAN connector
- Glossary
|
Cable requirements98-132904-C Appendix B: System configurations B-31System configurationsCable 4 (Power cable)Cable type: 3-wire screened cable. Dimensions depend on the cable length.Cable 5 (Cable for SAILOR 6207 Connection Box)Cable type: 10-wire screened cable.Part number: 406209-941The cable screen must not touch any metal part of the connection box due to galvanicseparation.SAILOR 6222VHF DSCACC connectorLTW 10-pin,circular maleSignaldesignationCable pin406209-941(5 m)SAILOR6207ConnectionBoxIn from VHFSAILOR 6207ConnectionBox Ext.connectionsSignal descriptionPin 1 NMEA In+ Brown 1-1 2(3)-1 Impedance: 600 Ohm.Max. 2 mA at min. level of2 V (61162-1)Pin 2 NMEA In- Blue 1-2 2(3)-2Pin 3 NMEA In- White 1-3 2(3)-3 Impedance: 600 Ohm.Max. 2 mA at min. level of2 V (61162-2)Pin 4 NMEA In+ Green 1-4 2(3)-4Pin 5 MIC+ Yellow 1-5 2(3)-5 Microphone signalPin 6 Earpiece Grey 1-6 2(3)-6 Earpiece signalPin 7 Hook_PTT Pink 1-7 2(3)-7 Hook/PTT signalPin 8 Battery+(10.8-15.6 VDC)Red 1-8 2(3)-8 Battery supply when radiois onPin 9 Internal GND= -BatteryBlack 1-9 2(3)-9 Equipment groundPin 10 Internal GND= -BatteryOrange -SCREEN(Drain)1-10 2(3)-10 Equipment groundCable screen 1-11 2(3)-11 Cable screen must nottouch any metal part of theconnection box.1-12 2(3)-12 Not in use.Table B-4: Cable specifications for cable 5
|
