Salus AWRT10RF Quick Start Manual

Also see for AWRT10RF: System guide

Contents

Salus AWRT10RF Quick Start Manual Manual pdf 2 page image

When in Set Point Change mode, the keyshave the following functions.Key FunctionSELECT Toggle Permanent Hold ONor OFF if schedules (local orremote) are activeSETTINGS Save changes and go toHome Screen< or > View schedule periods ifschedule is local^ or v Increase or decrease the setpoint for the selectedheat/cool mode6. SettingsThe device has the following userselectable settings.Setting FunctionS 01DEGREE UNITSDisplay temperatures in Celsiusfor FahrenheitS 03 CLOCK FORMATSet 12- or 24-hour clock format*S 04DSTSet Daylight Savings Time activeor not*S 05 MONTHSet current month*S 06 DATESet current date*S 07 YEARSet current year*S 08 TIME - HOURSet current hour*S 09 TIME - MINUTESet current minute*S 10 CHNG SCHDLChange internal schedulesS 11 SPCL FUNCTIONSSpecial Functions (see below)S 12 IDENTIFY - CHNLInitiate Zigbee Identify mode* These setting are not visible when thedevice is connected to a cloud servicesince the service provides the date, timeand schedules.The keys have the following functions inSettings mode.Key FunctionSELECT Save changes and move tonext/previous setting(long press for previous)SETTINGS Save changes and go toHome Screen< Save changes and move toprevious setting> Save changes and move tonext setting^ Toggle or increase the settingvalue for the settingv Toggle or decrease thesetting value for the setting7. Special FunctionsThe device can performadditional functions forcertain situations. Toaccess the functions,press the SETTINGS keyand go to S11, SPECIALFUNCTIONS.Enter the code for thedesired function from the table below,using the ^ and v keys, and press SELECT.Code Function22Leave Network: Leave currentnetwork after confirmation andlook for a new network WITHOUTresetting other parameters.Typically used for replacinggateways.49Parameter Setup: Enters theparameter modification mode toconfigure the device.86Factory Reset: Restores allparameters to factory defaultvalues and reboots. The device willask for confirmation to restorefactory defaults.99Rejoin Network: Rejoin thecurrent network. Typically used toadd a repeater to the network.When functions are not confirmed, orthere is no input within 3 minutes, thedevice will return to the Home Screen.8. Parameter ListFollowing are the available parameters inthe device. For operating details, see theUser Manual.Param FunctionP01 Paired Device TypeP02 Internal Schedule ActiveP03 Temperature Control MethodP04 TPI Minimum Turn Off TimeP08 Temperature Offset for currenttemperature sensorP09 Frost ProtectionP10 Maximum Set Point for bothHeat and Cool ModeP11 Minimum Set Point for bothHeat and Cool ModeP15 External Sensor EnableP16 External Sensor FunctionP17 Maximum Floor Temp for HeatmodeP18 Minimum Floor Temp for Heatand Cool modeP19 Radiator Actuator ControlP21 Valve ProtectionP25 Key Lock SourceP26 Set point change when keyslockedFCC and Industry CanadaFCCThis device complies with Part 15 of the FCC Rules. Operation issubject to the following two conditions: (1) this device may notcause harmful interference, and (2) this device must accept anyinterference received, including interference that may causeundesired operation.Changes or modifications to this unit not expressly approved bythe party responsible for compliance could void the user’sauthority to operate the equipment.NOTE: This equipment has been tested and found to comply withthe limits for a Class B digital device, pursuant to Part 15 of theFCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residentialinstallation. This equipment generates, uses and can radiateradio frequency energy, and if not installed and used inaccordance with the instructions, may cause harmfulinterference to radio communications. However, there is noguarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference toradio or television reception, which can be determined byturning the equipment off and on, the user is encouraged to tryto correct the interference by one or more of the followingmeasures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment andreceiver.• Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician forhelp.FCC AND INDUSTRY CANADARF Radiation Exposure statement: This equipment complies withFCC and Industry Canada RF radiation exposure limits set forth foran uncontrolled environment. This equipment should beinstalled and operated with a minimum distance of 20centimeters between the antenna and all persons.Cet appareil est conforme aux limites d’exposition aurayonnement FR du FCC et d’Industrie Canada pour unenvironnement non contrôlé. Cet appareil devrait être installé etdevrait fonctionner de sorte qu’il se trouve à une distance d’aumoins 20 cm entre l’antenne et toute personne.INDUSTRY CANADAThis device complies with Industry Canada licence-exempt RSSstandard(s). Operation is subject to the following two conditions:(1) this device may not cause interference, and (2) this devicemust accept any interference, including interference that maycause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canadaapplicables aux appareils radio exempts de licence.L'exploitation est autorisé e aux deux conditions suivantes : (1)l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur del'appareil doit accepter tout brouillage radioé lectrique subi,même si le brouillage est susceptible d'en compromettre lefonctionnement.WarrantySALUS North America, Inc. (“Salus”) warrants that for a period offive (5) years (“Warranty Period”) from the date of purchase bythe consumer (“Customer”), this device, excluding batteries(“Product”), shall be free of defects in materials andworkmanship under normal use and service in accordance withall supplied instructions. During the warranty period, Salus shall,at its option, repair or replace any defective Products, at nocharge for the device. Any replacement and/or repaired devicesare warranted for the remainder of the original Warranty Periodor ninety (90) days, whichever is longer.This warranty does not cover removal or reinstallation costs. Thiswarranty does not apply to any Product (i) which has beenmodified, repaired, or altered, except by Salus or an authorizedSalus representative, (ii) which has not been maintained inaccordance with any handling or operating instructions suppliedby Salus, or (iii) which has been subjected to unusual physical orelectrical stress, misuses, abuse, negligence or accidents.This warranty is the only express warranty Salus makes for theProduct. Any implied warranties, including warranties ofmerchantability or fitness for a particular purpose, are limited tothe Warranty Period or the shortest period allowed by law.SALUS SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANYKIND, INCLUDING ANY SPECIAL, INCIDENTAL OR CONSEQUENTIALDAMAGES RESULTING, DIRECTLY OR INDIRECTLY, FROM ANYBREACH OF ANY WARRANTY, EXPRESS OR IMPLIED, OR ANYOTHER FAILURE OF THIS PRODUCT. Some states and provinces donot allow the exclusion or limitation of incidental orconsequential damages, or limitation on the duration of impliedwarranties of merchantability or fitness, so these exclusions orlimitations may not apply to you.No oral or written information or advice given by Salus or a Salus-authorized representative shall modify or extend this warranty.If any term is held to be illegal or unenforceable, the legality orenforceability of the remaining terms shall not be affected orimpaired.Customer’s sole and exclusive remedy under this limitedwarranty is product repair or replacement as provided herein. Ifa Product under warranty is defective, the Customer may:• contact the party (“Seller”) from which the Customerpurchased the Product to obtain an equivalent replacementproduct after the Seller has determined that the Product isdefective and the Customer is eligible for a replacement, or• contact Salus Service at support@salusinc.com, todetermine whether the device qualifies for a replacement. Ifa replacement is warranted and is shipped prior to thereturn of the device under warranty, a credit card is requiredand a hold may be placed on the Customer’s credit card forthe value of the replacement until the returned device isverified as eligible for replacement, in which case, theCustomer’s credit card will not be charged.This warranty gives you specific legal rights, and you may alsohave other rights that vary from jurisdiction to jurisdiction. If youhave any questions regarding this warranty, please write Salusat:SALUS North America, Inc.850 Main StreetRedwood City, CA 94063

/ 2

Related manuals for Salus AWRT10RF