Salus CT100 Instruction Manual

Also see for CT100: Instruction manual Instruction manual

Contents

setting the temperature

Salus Controls plcEnterprise Park, BalaGwynedd, LL23 7NLRegional offices, England & Scotland.Web: www.salus-tech.comEmail: sales @salus-tech.comSales +44 (0) 8700 766900Technical +44 (0) 8700 766902Customer Services +44 (0) 8700 766902Maintaining a policy of continual product development Salus Controlsplc. reserve the right to change specification, design and materials ofproducts listed in this brochure without prior notice.Manual Issue No. IM-CT100-001Cylinder/Pipe THERMOSTATfor Model No. CT100Instruction ManualThe CT100 is a practical surface mounted mechanical thermostat.This thermostat will allow the user to control the temperature ofDomestic Hot Water Cylinders (uninsulated and foam lagged).This unit comes complete with a wire strap which enables the CT100 tobe used also as a pipe thermostat.This unit can be used to switch a circulating pump, boiler or mostcommon motorised zone valves.WiringDiagramTerminals C and 2 makeon temperature rise.Terminals C and 1 makeon temperature fail.SpecificationDimension (mm)A B C105 50 45Voltage Rating : 230 AC 50HzSwitch Rating : 16A resistive: 4A inductiveSwitch Type : Single pole, double throw (SPDT)Temperature Setting Range : 40 to 80 oCAmbient Temperature : 0 to 55 oCAgency Approval : CEFIXINGS FOR BOTH CYLINDER/PIPE THERMOSTAT ARE INCLUDED WITHIN THE BOX.InternalDiagramCT100THERMOSTATC 21ABCOnce the CT100 has beensituated in the correct locationand connected, simply turnthe dial to the desired settingmaking sure the temperaturerequired lines up with thearrow on the main body of theCT100. Fixings for bothCylinder/Pipe Thermostat areincluded within the box.Setting TheTemperatureThank you for purchasing this Salus product - if installing for someoneelse, please ensure that the instructions are handed to the householder.Warning - Please read this manual prior to installation or use.Shock HazardThis unit must be installed by a competent person, in accordance withBS 7671 (the IEE Wiring Regulations), or other relevant nationalregulations and codes of good practise.Always isolate the AC Mains supply before removing the unitfrom the Industry Standard Back Plate.

/ 1

Related manuals for Salus CT100