Salus Connected Wireless System Manual
                                                         | |
Contents
|
2-4Module 2 – Wireless AccessoriesSS881ZB Embedded Door SensorSection 2Step 1. Apply a self-adhesive drill guideto mark the desiredlocationStep 2. Drill a 7/8”diameter hole at least 2 6”deep through the guideThen remove the guideremnantsStep 3. Insert the sensorsleeve in the hole until theflange seats on the surfaceSALUS recommends locating the embedded door sensor in the door jamb on the hingeside of the door so that closing the door activates the plunger (A1 Above) If this locationis not convenient due to obstacles such as glass panels, the sensor can be mountedon the opposite door jamb (A2), in the lintel above the door (B) or in the door itself (C)Location C is not recommended for steel doors due to potential signal interference issuesIf required, remove the flange fromthe sleeve before inserting.Installation Instructions |
Related manuals for Salus Connected Wireless System
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine