Salus SQ610 Quantum Manual

Also see for Quantum SQ610: Manual Manual Full user manual Manual

15 РусскийČeský Polski EnglishShort description of some selected functions(all functions are described in the full version of the SQ610 manual):1. DISPLAY TEMP RESOLUTION: This function determines the resolution of the displayedtemperature ( 0.5°C or 0.1°C ).2. CONTROL ALGORITHM: This function defines how to control the room temperature. Availableoptions are: ITLC for Underfloor Heating / Radiators / Electrical Heating (that ’ s advanced algorithm forprecise maintenance of room temperature), hysteresis +/-0.5°C or +/-0.25°C, THB Actuator (optionrecommended for systems with THB auto balancing actuators).3. S1/S2 INPUT: A floor sensor, an external temperature sensor or an occupancy sensor can beconnected to the S1/S2 input of SQ610RF. Additionally, by connecting a NO type of ON/OFF voltage-free contact, you can use this input as a OneTouch rules trigger (programmed in the Salus Smart Homeapp) or as a Heat/Cool changeover.4. VALVE PROTECTION: This function activates all actuators once a week for 5 minutes (in summer,this function helps to prevent the actuators stuck).6. MIN TURN OFF TIME: Minimum switch-off time (thermostat will not send the signal forheating/cooling more often than specified in this parameter).7. OPTIMISATION FEATURE: Optimum Start and Optimum Stop functions are energy saving featurethat makes thermostat most cost effective (in combination with ITLC control algorithm).9. DEVICE INFORMATION: In this menu user can check: Software Version, RF range value, Paireddevices or also user can activate Identification mode.*10. FACTORY RESET: Here you can RESET your device to factory settings. After successfull resetdevice will be removed from ZigBee network and you will need to add / pair your device again.8. COMFORT WARM FLOOR: This function helps to keep the floor warm, even if the room is warmenough and there is no need to turn on the heating. User can select 3 levels of warm floor feature.Please note it is not an economy feature, as your heating system may be ON even if there is no heatingdemand from the room thermostat. It is COMFORT feature which keeps your floor warm all the time.5. INTERNAL RELAY (COM/NO): Internal relay activation or deactivation with COM/NO outputs use. Defaultis enable.