Samcon ExCam IPP5635 User Manual
                        | |
Contents
| 
Doc.-ID: 160720-PT08BA-SS-ExCam IPP5635_en_rev.00.docx, page 19 of 246 Network access and visualizationIn the following, the most important steps for the initial commissioning of the camera aredescribed. The configuration menu of the web surface allows an intuitive navigation andoffers several configuration possibilities. For a comprehensive user manual of the websurface, please refer to the to the Axis user manual, also available at the following link:http://www.axis.com/us/en/products/axis-P5635-EAt delivery, the ExCam IPP5635 is set to the applicable net frequency (50Hz or 60Hz). Ifthe camera is used at a location with a differing net frequency, a flickering of the picturemight be noticeable, particularly in surroundings with fluorescent tubes. In such a case,the applicable settings have to be carried out within the menu “System Options > Ad-vanced > Plain Config”User: rootPassword: root6.1 Browser SupportA list with the currently supported web browsers, operating systems, and required add-ons can be viewed at:http://www.axis.com/techsup/cam_servers/tech_notes/browsers.htm6.2 Assigning the IP addressThe ExCam IPP5635 is an Ethernet network camera requiring an IP address to access it.Usually, a DHCP server is integrated in most networks which automatically assigns an IPaddress.In case no DHCP server is available in the network, the ExCam IPP5635’s default IPaddress is 192.168.0.90 (subnet masking 255.255.255.0).Using the AXIS IP Utility is the suggested procedure to determine the IP address underWindows. The application is available for download at:http://www.samcon.eu/en/info-center/drivers-software/In case it is not possible to assign the IP address, it might be necessaryto change the firewall settings! |
Related manuals for Samcon ExCam IPP5635
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine