Samsung 2.004111209005e16 Instruction Manual

20• Each time the Mode button is pressed, the TV indicator (red) and the DVD RECEIVER indicator (green) will flash alternately.• You can operate the TV while the TV indicator is flashing and the DVD player while the DVD indicator is flashing.• Buttons Enabled for TV Operation: POWER, CHANNEL, VOLUME, TV/VIDEO and Numeric (0-9) buttons.• By default, the remote control is set to work with Samsung TVs.See page 61 for more information on the operation of the remote control.Press MODE button.To Operate the TV and DVD Player with a Single Remote Control2 3Press the MODE button sothat the TV indicator on theremote control flashes.TV DVD RECEIVERTV DVD RECEIVERPress the POWER button toturn on the TV.5 6Press the MODE button sothat the DVD RECEIVERindicator on the remotecontrol flashes.Press DVD button to selectDVD/CD mode.Before Using Your DVD PlayerYour DVD player is capable of playing DVD, VCD, CD, MP3 and JPEG discs.Depending on the discyou are using, these instructions may vary slightly. Read the instructions carefully before using.19• By default, the video format is set to "NTSC".• Each time the button is pressed, the video format switches between "NTSC"and "PAL".• Each country has a different video format standard.• For normal playback, the video format of the disc must be the same as thevideo format of your TV.Turn off the main unit and then press NTSC/PAL.Selecting the Video Format1 Plug the power cord into theAC power supply.4 Press TV/VIDEO button toselect VIDEO mode.CONNECTIONS