21Disc Playback2 Load one or more discs.• Place a disc gently into the tray with the disc’s labelfacing up.• Depending on the content of the disc, the initial screen may appear different.• Depending on the recording mode, some MP3-CDs cannot be played.• Table of contents of a MP3-CD varies depending on the MP3 track format recorded on the disc.• To resume playback, press PLAY/PAUSEbutton again.1 Press OPEN/CLOSE button to open thedisc tray.3 Press DISC SKIP button.• Rotate the carousel tray about 72 degrees so you can load thethird, fourth, and fifth discs.• Rotate the carousel tray about 120 degrees during playbacking.4 Close the compartment by pressing theOPEN/CLOSE button again.To temporarily pause playback,press PLAY/PAUSE during playback.DVD VCD CD• Playback starts automatically.MP3 JPEG• Playback starts automatically.• If the TV is on, a list of MP3s onthe CD will appear on the TVscreen.Something like youBack for goodLove of my lifeMore than wordsI need youMy loveUptown girlDVD RECEIVER SMART NAVI• If pressed once, “PRESS PLAY” is displayed and thestop position will be stored in memory.If PLAY/PAUSE ( ) button or ENTER button ispressed, playback resumes from the stop position.(This function works only with DVDs.)• If pressed twice, “STOP” is displayed, and ifPLAY/PAUSE ( ) button is pressed, playbackstarts from the beginning.To stop playback,press STOP during playback.Note22OPERATIONSelecting a Disc in the Disc changerTo select a specific disc, press thecorresponding DIRECT PLAY (1, 2, 3, 4, 5)buttons on the front panel or DISC SKIP on theremote control, until the required disc indicatorflashes.The DVD/CD function is automatically selected when Disc Skip is pushed.If you wish to play the current disc only, pressREPEAT on the front panel one or more times,until REPEAT all DISC is displayed.If the disc selected is not loaded, the next disc isplayed automatically.• All the discs will be played in turn, starting with the one selected.