Samsung 4 Series Quick Setup Manual
Also see for Series 4+: User manualUser manualUser manualUser manualUser manual
Quick Setup GuideCongratulations on the purchase of your new Samsung TV.Read this setup guide to get your TV up and running quickly.1-800-SAMSUNG (1-800-726-7864)Samsung Electronics America, Inc.85 Challenger Road Ridgefield Park, NJ 07660-2112Samsung Electronics Canada Inc.55 Standish Court Mississauga, Ontario L5R 4B2Call Center hours of operation: Mon-Sun, 9:00 AM -12AM EST.To register this product, visit: www.samsung.com/register.STOPPlease do not return this unit.If you have problems operating yourTV, call:1-800-SAMSUNG (1-800-726-7864)For web support please visit:www.samsung.com/supportStep 1: Install the StandFollow the steps below to connect the TV to the stand.✎ NOTEx Make sure to distinguish between the front and back of the Stand andGuide Stand when assembling them.x Make sure that at least two persons lift and move the LED TV.x Stand the product up and fasten the screws. If you fasten the screws withthe LED TV placed down, it may lean to one side.UN19C4000, UN22C4000, UN22C40101 Insert the stand body into the standbase.2 Screw the stand base to the standbody.3 Slide the TV onto the standbody.RELEASELOCKLOCELEASESELOCRELEAUN26C40001 Connect the Guide Stand to theStand using four screws (M4 XL12) as showns ssss2 With your TV upright, connect theTV to the Stand as shown.3 Fasten three screws (M4 X L8) atposition 1, and then fasten threescrews (M4 X L8) at position 2.sssss1sssss2Step 4: Run Plug & PlayWhen you turn on your TV for the first time, it automatically launches the Plug &Play function. With Plug & Play, you can select the On Screen Display language,set the clock mode, and launch the TV’s channel memorizing process.It also displays connection instructions similar to those in this guide.To navigate while Plug & Play is running, press the Up, Down, Left or Right arrowbuttons on your remote. To make a selection, press the ENTERE button.To skip a screen, press the MENU button. To turn on your TV, press the POWERbutton on the remote or on the TV. To run Plug & Play, follow these steps:1 Using your remote control, selectthe language for the On ScreenDisplay (OSD), and then press theENTERE button.2 Select Home Use, and thenpress the ENTERE button. Ifyou select Store Demo, the TVwill reset your picture and audiosettings every 30 minutes.3 Select Antenna Source tomemorize. If Antenna Source isCable or Auto, you must selectyour cable system type. Afterselecting source, select Search; then press the ENTERE button on yourremote.✎ Most cable systems are Standard (STD) systems, If you are not sure aboutwhat kind of cable system you have, contact your cable company.✎ If your TV is attached to a cable or satellite box, skip Steps 3 through 5. AfterPlug & Play is complete, set your TV to Channel 3 or 4, according to thedirections for your cable or satellite box.4 The TV memorizes the available channels. This process can take up to 45minutes.5 After the TV has memorized the channels, choose the Clock Mode. SelectAuto if you have a digital channel in your area. Select Manual if you don’t, orif you have a cable or satellite box. When done, press the ENTERE button.✎ If you select Manual, the clock setting screen appears.6 Select the daylight savings time setting: Off or On, and then press theENTERE button.7 Select the time zone in which you live, and then press the ENTERE button.8 After the time zone screen, The connection method for best HD screenquality is displayed. Press Right arrow button on your remote to view eachscreen in succession. Press the Blue button to skip this section.9 The Enjoy your TV. screen appears. Then press the ENTERE button.If You Want to Rerun Plug & Play1. Press the SOURCE button on your remote, then select TV mode.2. Press the MENU button on your remote to display the menu.3. Press the ▲ or ▼ button to select Setup, and then press the ENTEREbutton.U Move E EnterSelect Language of the OSD.Menu Language :Plug & PlayEnglishEspañolFrançaisStep 2: Connect Antenna or CableVHF/UHF AntennaConnect Ant In to• Wall cable jack• VHF/UHF Antenna• Cable or Satellite boxAnt or Cable OutUse a 75 ohm (round) cable.orAntenna Cable (Not Supplied)Make sure the AC power cord is plugged in securely tothe wall outlet and the TV.U Move E EnterAnrenna Source :Digital Cable System :Analog Cable System :AirCableAutoSearchPlug & PlayTop viewGuide StandScrews (M4 X L12)StandRearRearFrontAll manuals and user guides at all-guides.comall-guides.com |
Related manuals for Samsung Series 4+
Samsung 4 Series Quick Setup Manual
Samsung 4 Series Quick Setup Manual
Samsung 5 Series Quick Setup Manual
Samsung 9 Series Quick Setup Manual
Samsung 5 Series Quick Setup Manual
Samsung 5 Series Quick Setup Manual
Samsung 5 Series Quick Setup Manual
Samsung 43QA6 Series Quick Setup Manual
Samsung 43AU8 Series Quick Setup Manual
Samsung 43UA9 Series Quick Setup Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine