Samsung 9 Series Quick Setup Manual

Also see for UN55C9000ZF: User manual User manual User manual User manual Service manual

Step 3: Connect External DevicesConnecting an AV device (DVD/Blu-ray player, cable/satellite boxStep 2: Connect Power and Antenna or CableStep 1: Install the Batteries into the RemoteTouch Control1 Slide and open thebattery cover inthe direction of thearrow.2 Insert the batterywith the Samsunglogo facing up.3 Slide and close thebattery cover inthe direction of thearrow.Mini Remote Control1 Turn the battery covercounterclockwise to unlock itand then separate the batterycover.2 Insert a 3V Lithium batterywith the + side facing downinto the battery cover.3 Place the battery cover intothe remote control aligning it with the grooves and then turn the battery coverclockwise to lock the cover.✎ If the remote control doesn’t work, check the following:x Is the TV power on?x Are the plus and minus ends of the batteries reversed?x Are the batteries drained?x Is there a power outage or is the power cord unplugged?x Is there a special fluorescent light or neon sign nearby?Quick Setup GuideCongratulations on the purchase of your new Samsung TV.Read this setup guide to get your TV up and running quickly.1-800-SAMSUNG (1-800-726-7864)Samsung Electronics America, Inc.85 Challenger Road Ridgefield Park, NJ 07660-2112Samsung Electronics Canada Inc.55 Standish Court Mississauga, Ontario L5R 4B2Call Center hours of operation: Mon-Sun, 9:00 AM -12AM EST.To register this product, visit: www.samsung.com/register.STOPPlease do not return this unit.If you have problems operating yourTV, call:1-800-SAMSUNG (1-800-726-7864)For web support please visit:www.samsung.com/supportAUDIO OUTVIDEO OUTLowest Quality ConnectionAudio/Video connection (480i only)Using an Audio/Video CableDVD, Blu-ray player, cable box,STB satellite receiver, VCRDeviceUse one of the connections below to connectyour TV to an external A/V device.We recommend using HDMI for the highestpicture quality.VHF/UHF AntennaConnect Ant In to• Wall cable jack• VHF/UHF Antenna• Cable or Satellite boxAnt or Cable OutUse a 75 ohm (round) cable.orAntenna Cable(Not Supplied)AV Adapter (Supplied)Video Cable (Not Supplied)Audio Cable (Not Supplied)AV Adapter (Supplied)OPENCLOSEStep 4: Run Plug & PlayWhen you turn on your TV for the first time, it automatically launches the Plug &Play function. With Plug & Play, you can select the On Screen Display language, setthe clock mode, and launch the TV’s channel memorizing process.It also displays connection instructions similar to those in this guide.To navigate while Plug & Play is running, press the Up, Down, Left or Right arrowbuttons on your remote. To make a selection, press the ENTERE button.To skip a screen, press the MENU button. To turn on your TV, press the POWERbutton on the remote or on the TV. To run Plug & Play, follow these steps:1 Turn on the TV and Touch Control, andthen tap OK on your remote.✎ It may take about one minute to establisha wireless connection between the TV andTouch Control using the Samsung WirelessLAN Adapter.2 Connect the Samsung Wireless LANAdapter to the TV. If you are failed, reconnect the Samsung Wireless LANAdapter and then try again. For connecting the Samsung Wireless LANAdapter, please see your Owner’s Manual.3 Using your remote control, select the language for the On Screen Display(OSD), and then press ENTERE button.4 Select Home Use, and then press the ENTERE button. If you select StoreDemo, the TV will reset your picture and audio settings every 30 minutes.5 Select Antenna Source. If Antenna Source is Air, Cable or Auto, you mustselect your cable system type. After selecting source, select Search; thenpress the ENTERE button on your remote.✎ Most cable systems are Standard(STD) systems, If you are not sure aboutwhat kind of cable system you have, contact your cable company.All manuals and user guides at all-guides.comall-guides.com

/ 2

Related manuals for Samsung UN55C9000ZF