English - 26Display Modes❑Both screen position and size will vary depending on the type of PC monitor and its resolution.The resolutions in the table are recommendedHDMI/DVI InputMode Resolution HorizontalFrequency (kHz)VerticalFrequency (Hz)Pixel ClockFrequency (MHz)Sync Polarity(H/V) PS42B430 PS50B430IBM 640 x 350 31.469 70.086 25.175 + / - ✓ ✓720 x 400 31.469 70.087 28.322 - / + ✓ ✓MAC 640 x 480 35.000 66.667 30.240 - / - ✓ ✓832 x 624 49.726 74.551 57.284 - / - ✓ ✓VESA DMT640 x 48031.469 59.940 25.175 - / - ✓ ✓37.861 72.809 31.500 - / - ✓ ✓37.500 75.000 31.500 - / - ✓ ✓800 x 60037.879 60.317 40.000 + / + ✓ ✓48.077 72.188 50.000 + / + ✓ ✓46.875 75.000 49.500 + / + ✓ ✓1024 x 76848.363 60.004 65.000 - / - ✓ ✓56.476 70.069 75.000 - / - ✓ ✓60.023 75.029 78.750 + / + ✓ ✓1360 x 768 47.712 60.015 85.500 + / + ✓VESA CVT720 x 576 35.910 59.950 32.750 - / + ✓ ✓1280 x 720 44.772 59.855 74.500 - / + ✓56.456 74.777 95.750 - / + ✓VESA GTF 1280 x 720 52.500 70.000 89.040 - / + ✓When using an HDMI/DVI cable connection, you must use the HDMI IN 2(DVI) terminal.NThe interlace mode is not supported.NThe set might operate abnormally if a non-standard video format is selected.NPC DisplaySetting Up Your PC Software (Based on Windows XP)❑The Windows display-settings for a typical computer are shown below. The actual screens onyour PC will probably be different, depending upon your particular version of Windows and yourparticular video card. However, even if your actual screens look different, the same basic set-upinformation will apply in almost all cases.(If not, contact your computer manufacturer or Samsung Dealer.)1. First, click on Control Panel on the Windows start menu.2. When the control panel window appears, click on Appearance and Themes and a displaydialog-box will appear.3. When the control panel window appears, click on Display and a display dialog-box will appear.4. Navigate to the Settings tab on the display dialog-box.The correct size setting (resolution)OptimumPS42B430 : 1024x768 pixels-PS50B430 : 1360x768 pixels-If a verticalfrequency option exists on your display settings dialog box, the correctvalue is 60 or 60 Hz. Otherwise, just click OK and exit the dialog box.