English - 31Issue SolutionNo Picture, No VideoTV won’t turn on. Make sure the AC power cord is plugged in securely to the wall outlet and the TV.Make sure the wall outlet is working.Try pressing the POWER button on the TV to make sure the remote is workingproperly. If the TV turns on, it may be caused by Remote Control. To fix the Remoteproblem, refer to ‘Remote control does not work’ below.●●●TV turns off automatically. Check if the Sleep Timer is set to On in the Setup menu.If connected the TV to your PC, check your PC power settings.Make sure the AC power cord is plugged in securely to the wall outlet and the TV.If there is no signal for about 10 ~ 15 minutes with Antenna/Cable connection, the TVwill turn off.●●●●No picture/Video. Check cable connections.(remove and reconnect all cables of TV and external devices)Set your external device’s (Cable/Set top Box, DVD, Blu-ray etc) video output to matchthe connections to the TV input. For example, external device’s output: HDMI, TV’sinput: HDMI.Make sure your connected device is powered on.Make sure to select the TV’s correct source by pressing the SOURCE button on the TVremote.●●●●RF(Cable/Antenna) ConnectionCannot receive all channels. Make sure Antenna cable is connected securely.Please try Plug & Play to add available channels to the channel list. Go to MENU -Setup - Plug & Play and wait for all avaiable channels are stored.Verify Antenna is positioned correctly.●●●Picture is distorted: macroblock,small block, dots, pixelizationCompression of video contents may cause picture distortion especially on fast movingpictures such as sports and action movies.Low signal level can cause picture distortion. This is not a TV issue.●●PC Connection‘Not Supported Mode’ message. Set your PC’s output resolution and frequency so it matches the resolutions supportedby the TV.●PC is always shown on source listeven if not connected.This is normal; PC is always shown on the source list even though a PC is notconnected.●Video is OK but there is no audiowith HDMI connection.Check the audio output setting on your PC.●
