Samsung 450 User Manual

Also see for 450 Series: E-manual E-manual User manual User manual Quick setup guide

Contents

English - 5Connecting to Video1 Unplug the cable or antenna fromthe back of the TV.2 Connect the cable or antenna to theANT IN terminal on the back of theVCR.3 Connect an Antenna Cable betweenthe ANT OUT terminal on the VCRand the ANT IN terminal on the TV.4 Connect a Video Cable between theVIDEO OUT jack on the VCR andthe AV IN 1 [Y/VIDEO] or AV IN 2[VIDEO] jack on the TV.5 Connect Audio cables between theAV IN 1 [R-AUDIO-L] jacks on theTV and the AUDIO OUT jacks onthe VCR.6 Press the SOURCE button on theremote control until you see the VCRsignal (see “To Select the Source”on page 10).® When connecting a VCR, match the color of the connection terminal to the cable.® If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to hook up to the right and left audio input jacks of theTV. If your VCR is stereo, you must connect two cables.® Each VCR has a different back panel configuration.® When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow).Connecting a VCRVCR Rear PanelTV Side PanelVideo Cable (Not supplied)Audio Cable(Not supplied) 12TV Rear PanelAntenna Cable (Not supplied)Connecting to S-Video1 To begin, follow steps 1–3 in theprevious section to connect theantenna or cable to your VCR andyour TV.2 Connect a S-Video cable betweenthe [S-VIDEO] jack on the TV andthe S-VIDEO OUT jack on the VCR.3 Connect Audio cables between theAV IN 2 [R-AUDIO-L] jacks on theTV and the AUDIO OUT jacks onthe VCR.4 Press the SOURCE button on theremote control until you see the VCRsignal (see “To Select the Source”on page 10).® When connecting a VCR, match the color of the connection terminal to the cable.® Each VCR has a different back panel configurationVCR Rear PanelTV Side PanelS-Video Cable (Not supplied)Audio Cable (Not supplied)1 2TV Rear PanelAntenna Cable (Not supplied)